JVC GVT0150-008A Instructions Manual Download Page 2

Page: 2 / 97

G-1

Warnings, Cautions and Others

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT
2.

CAUTION

: Do not open the top cover. There are no user

serviceable parts inside the unit; leave all servicing to qualified
service personnel.

CAUTION

: Visible and invisible laser radiation when open and

interlock failed or defeated. Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED

INSIDE THE UNIT.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.

CAUTION —

button!

(XV-THC9/ XV-THC6/ XV-THC3)

Disconnect the mains plug to shut the power off completely
(the STANDBY lamp goes off).
The

button in any position does not disconnect the mains

line.
• When the system is on standby, the STANDBY lamp lights

red.

• When the system is turned on, the STANDBY lamp goes off.
The power can be remote controlled.

CAUTION
(SP-PWC9/SP-PWC6/SP-PWC3)

The power supply to the subwoofer is linked to the center unit.
The POWER ON lamp on the subwoofer lights green when the
power is turned on.

TH-C3C6C7C9[AUWUSUNUGUX].book Page 1 Monday, April 25, 2005 8:56 PM

Summary of Contents for GVT0150-008A


































































































Search results

Summary of Contents for GVT0150-008A

Reviews:

Related manuals for GVT0150-008A

Brands by name

Popular brands

JVC GVT0150-008A, Instructions Manual

Search results

Summary of Contents for GVT0150-008A

Reviews:

Related manuals for GVT0150-008A

Brands by name

Popular brands