JVC GVT0150-008A Instructions Manual Download Page 17

Page: 17 / 97

Connections

NOTE

• The way of connecting the system cord varies depending on the type

of the powered subwoofer.

You can enjoy the sound of an analog component.

NOTE

• The signals input to the VIDEO jack of the VCR IN jacks will be

output only from the VIDEO jack of the VIDEO OUT jacks, not from
the S-VIDEO jack of the VIDEO OUT jacks.

You can enjoy the sound of a digital component.

* DBS = Direct Broadcasting Satellite

NOTE

• Only digital audio signals can be input when selecting “DBS D” as

the source to play. (

pg. 18) When connecting a video component

such as a DBS tuner, operate this system to listen to the sound.

Make sure that all other connections have been completed.

CAUTION

• Disconnect the power cord before cleaning or moving the system.
• Do not pull on the power cord to unplug the cord. When unplugging

the cord, always grasp and pull the plug so as not to damage the cord.

•

(For Central, South America, and Southeast Asia) If the AC outlets do
not match the AC plugs, use the supplied AC plug adapters.

Connecting the powered
subwoofer

Connecting to an analog
component

Powered

subwoofer

System cord
(supplied)

Center unit

Align the

marks.

Align the

marks.

RCA pin plug
cord
(not supplied)

To composite video output

To S-video output

To audio output

Center unit

VCR (

)

TV (

)

Cassette recorder (

)

Composite video

cord

(not supplied)

S-video cord

(not supplied)

Connecting to a digital
component

Connecting the power
cord

Digital optical cord (not supplied)

To digital optical output

DBS

tuner

MD player

Center unit

AC IN

Center unit

Powered
subwoofer

Power cord

(Supplied)

Power cord

Plug into AC outlets.

Do not connect the power cord until all other connections have been made.

TH-C3C6C7C9[AUWUSUNUGUX].book Page 14 Monday, April 25, 2005 8:56 PM

Summary of Contents for GVT0150-008A


































































































Search results

Summary of Contents for GVT0150-008A

Reviews:

Related manuals for GVT0150-008A

Brands by name

Popular brands

JVC GVT0150-008A, Instructions Manual

Search results

Summary of Contents for GVT0150-008A

Reviews:

Related manuals for GVT0150-008A

Brands by name

Popular brands