JVC GV-SP2 Instructions Manual Download

Page: 31 / 36

Printer is not

connected or Power

OFF. Printing aborted.

Printing data was not

transmitted. Printing

aborted.

Data transmission

error has occurred.

Printing aborted.

Do you want to abort

printing?

Memory is not enough.

Printing aborted.

Data deleted from

spooler. Printing stops.

Bi-directional

communications are

not supported. Please

enable bi-directional

communications on

the Printer Properties

window.

The spool settings are

incorrect. The settings

are automatically

changed. Press the OK

button and try printing

again.

Invalid data. Select an

appropriate printer

driver.

Software requirements

are damaged. Install

the printer driver

again.

This message appears if the printer power is not on, or if

the power supply is not connected properly.

After connecting the power supply properly, turn on the

printer.

This message appears if an attempt was made to print

without first sending the printing data to the printer.

Load the image into the personal computer first, and then

initiate the printing operation.

This message is displayed when communication has

become impossible due to a faulty USB cable connection

or for some other reason while sending an image to the

printer.

Check the USB cable connection and try printing again.

To stop printing while printing is in progress, click

Stop

This message is displayed when the memory capacity of

the PC is insufficient.

Add more memory or close any other applications that

may be running currently.

This message is displayed because print data has been

deleted from the spooler.

Repeat the print procedure to re-print.

Click

Properties

–

Details

, and then

Spool Settings...

display the

Spool Settings

window. Select

Enable bi-

directional support for this printer

The

Spool Settings...

under

Properties

–

Details

have not

been made correctly.

Take the action indicated in the on-screen message.

This message is displayed when an attempt is made to

utilize the USB driver for this device with a printer driver

other than that for this device.

Check the model of the printer being used and check the

printer specified in the field

Print to the following port:

the printer’s

Properties

window.

The printer driver has not been installed properly.

Re-install the printer driver.

Message

Page

13, 22

17, 25

13, 22

—

13, 22

14, 23

Appears when:

Action:

Summary of Contents for GV-SP2




































Search results

Summary of Contents for GV-SP2

Reviews:

Related manuals for GV-SP2

Brands by name

Popular brands

JVC GV-SP2, Instructions Manual

Search results

Summary of Contents for GV-SP2

Reviews:

Related manuals for GV-SP2

Brands by name

Popular brands