manualshive.com logo in svg

JVC GV-SP2, Instructions Manual

Share
Download
JVC GV-SP2 Instructions Manual Download Page 11

EN 

9

LOADING THE PAPER TRAY

Printing side

Loading paper in the paper tray

Partition panel 

A

Removing and Attaching the Paper
Tray

• Push the tray slightly to unlock the latch,

then pull it out.

• To attach, insert until you hear the paper

tray catch in place.

1.

Adjust partition panel 

A

 according to the

paper size.

2.

Press down the lever and insert the paper.

• Load the paper shiny side up, with the

side that has the wider area beyond the
perforations closest to partition panel 

B

.

Load no more than 25 sheets.

3.

Adjust partition panel 

B

 according to the

paper size.
After inserting the paper, push in 

C

 until it

clicks into place.

NOTES:

•

Fan the paper to separate the individual
sheets.

•

Be sure to thoroughly read the precautions
listed on the paper tray.

•

Place the printing paper shiny side up (the
side with no printing on it) in the paper tray.
A paper jam could result if the paper is
inserted with the wrong side facing up.

•

If a paper jam occurs, refer to page 12,
"Clearing a Paper Jam."

•

Remove the paper from the paper outlet.  If
more than 25 sheets accumulate in the
paper outlet, a paper jam could result.

Perforations

Perforations

Partition
panel 

B

Partition
panel 

A

Lever

C

Summary of Contents for GV-SP2





































Reviews:

No comments

Brands by name

Popular brands

Load more brands