JVC GV-SP2, Instructions Manual

Page: 2 / 36

Dear Customer,
Thank you for purchasing this Digital System Printer. Before use, please read the
safety information and precautions contained in the following pages to ensure safe
use of this product.
i
Using This Instruction Manual
•All major sections and subsections are
listed in the Table Of Contents
(
Z
pg. 4).
•Notes appear after most subsections. Be
sure to read these as well.
•Basic and advanced features/operation
are separated for easier reference.
It is recommended that you . . .
... refer to “Controls, Indicators and
Connectors” (
Z
pg. 5) and familiarize
yourself with button locations, etc.
before use.
... read thoroughly the Safety Precautions
and Safety Instructions that follow.
They contain extremely important
information regarding the safe use of
your new Digital System Printer.
Power Save Mode
1. To put the printer in power save
mode, hold down the STANDBY/ON
button for several seconds while
the printer’s power is off.
2. During power save mode, printer’s
power will automatically be turned off
if the printer is not used for a while.
3. To print again after the printer’s power
has been automatically turned off,
press the power button once and the
power will come back on.
4. To put the printer in power save mode
back again, repeat step 1.
You are recommended to carefully
read the cautions on page 3 before
use.
When the equipment is installed in a
cabinet or on a shelf, make sure that it
has sufficient space on all sides to allow
for ventilation (10 cm or more on both
sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a
newspaper, or cloth etc. the heat may not
be able to get out.)
No naked flame sources, such as lighted
candles, should be placed on the
apparatus.
When discarding batteries, environmental
problems must be considered and the
local rules or laws governing the disposal
of these batteries must be followed
strictly.
The apparatus shall not be exposed to
dripping or splashing.
Do not use this equipment in a bathroom
or places with water.
Also do not place any containers filled
with water or liquids (such as cosmetics
or medicines, flower vases, potted plants,
cups etc.) on top of this unit.
(If water or liquid is allowed to enter this
equipment, fire or electric shock may be
caused.)