manualshive.com logo in svg

JVC GV-LS1 U, User Manual

Share
Download
JVC GV-LS1 U User Manual Download Page 33

17

P

re

p

ar

ati

on

Selecting the Format of Images to be Streamed/Saved

This unit can output up to two lines of images. Set the output method and image quality appropriate for your needs.
For the "NETWORK" settings not mentioned on these pages, refer to page 39 .

1 

Select "STREAM SETTINGS" in "NETWORK".
If the sub settings are not displayed, click "+" on the 
left of "NETWORK".

2 

Select an option from "STREAM 1/STREAM 2".

MotionJPEG(640x360)/NONE:
Select this to save recorded data inside the unit.
MotionJPEG (640x360) is used to control remotely 
from a browser, etc.
MPEG-2 TS (720x480)/MotionJPEG (640x360):
Outputs low resolution data that can be used for 
streaming, etc.
MPEG-2 TS (1920x1080)/MotionJPEG (640x360):
Outputs high resolution data that can be used for 
streaming, etc.

3 

Select an option from "MAX FRAME RATE 
(MotionJPEG)".

15 fps:
Outputs images at a rate of up to 15 frames per 
second. Suitable for shooting fast-moving subjects.
7.5 fps:
Outputs images at a rate of up to 7.5 frames per 
second. Suitable if the communication speed or 
terminal's throughput is low.
Selectable only when "STREAM 1/STREAM2" is set 
to "MotionJPEG(640x360)/NONE."

4 

Click the "SAVE" button.

The output image quality has been set.

Summary of Contents for GV-LS1 U
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands