manualshive.com logo in svg

JVC GV-LS1 U, User Manual

Share
Download
JVC GV-LS1 U User Manual Download Page 113

9

Chapter 3  Screen Descriptions - [CAMERA RESOURCE SETTING] Screen 

Use to confi gure settings such as video and audio for the 
currently used camera.

1.  Touch 

.

2.  Touch [CAMERA RESOURCE].

3.  Select the item to set by touching it.

"

 [STREAM SETTING] button

Use to change the stream setting for the camera.
Various restrictions apply depending on the stream 
setting of the camera, so use the setting appropriate for 
the time or situation.

[MPEG-2 TS(HD) + MotionJPEG]

t

 

Use to stream via the Internet in HD quality using 
"Camera Driver".
Recording onto the camera cannot be performed in this 
mode.

[MPEG-2 TS(SD) + MotionJPEG]

t

 

Use to stream via the Internet in standard quality using 
"Camera Driver".
Recording onto the camera cannot be performed in this 
mode.

[MotionJPEG]

t

 

Recording onto the camera can only be performed in 
this mode.

[Caution]
The stream setting cannot be confi gured when 
connected to the camera via the Internet.

"

Summary of Contents for GV-LS1 U
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands