JVC GV-HT1U, Instructions Manual

Page: 19 / 52

EN
19
Loading the Battery
The battery (BN-V607) is not charged when
shipped.
Charge it using the AC adapter before use.
Removing the Battery
•Open the battery compartment lid and take
out the battery.
1
OPEN THE BATTERY COMPART-
MENT LID
•Slide and open the battery compartment
lid in the direction of the arrow.
2
INSERT THE CHARGED BATTERY
•Note that the battery may be damaged if
it is inserted
incorrectly.
•Slide in the battery as far as it will go
until it is properly seated.
3
CLOSE THE BATTERY COMPART-
MENT LID
1, 3
2
Using AC power
When using the printer indoors, you can use
the AC Adapter instead of a battery.
1
CONNECT DC CORD
•Connect the DC cord to the AC Adapter
then to the printer.
2
SUPPLY AC POWER
•Connect the power cord to an AC outlet.
NOTE:
When using the provided DC cord, make
sure you connect the end of the cable with
the core filter to the printer. The core filter
reduces the interference.
DC IN
Jack
DC cord
Power lamp
2
1
DC IN
To
AC outlet