JVC GR-DX106 Instructions Manual Download Page 16

Page: 16 / 60

To S/AV

S-Video/Audio/
Video/Editing cable
(provided)

Connector
cover

* When connecting the cables, open this cover.
** The audio connection is not required for watching still

images only.

*** Connect when the S-Video connection is not used.

VCR

TAPE PLAYBACK

Connections

Make sure all units are turned off.

Connect the camcorder to a TV or VCR as shown

in the illustration.

If using a VCR . . . go to step 3.
If not . . . go to step 4.

Connect the VCR output to the TV input, referring to

your VCR’s instruction manual.

Turn on the camcorder, the VCR and the TV.

Set the VCR to its AUX input mode, and set the TV

to its VIDEO mode.

To choose whether or not the following displays
appear on the connected TV . . .

• Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (

墌

pg. 34, 36).

Or, press

DISPLAY

on the remote control to

turn on/off the date indication.

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (

墌

pg. 35, 36).

• Indications other than date/time and time code

..... set “ON SCREEN” to “LCD”, “LCD/TV” or “OFF” in

the Menu Screen (

墌

pg. 34, 36).

NOTES:

●

It is recommended to use the AC Adapter as the
power supply instead of the battery pack (

墌

pg. 7).

●

To monitor the picture and sound from the camcorder
without inserting a tape or memory card, set the
camcorder’s Power Switch

to “

” or “

”, then set

your TV to the appropriate input mode.

●

Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound when the
camcorder is turned on.

●

If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the TV as
interference will occur in the camcorder playback picture.

●

If no image is displayed or no sound is heard from the TV,
set “S/AV INPUT” to “OFF” in the Menu Screen
(

墌

pg. 35).

●

While the S-Video/Audio/Video/Editing cable is connected
to the S/AV connector

, sound cannot be heard from

the speaker.

Not
connected

To TV or VCR

To S-Video IN

Yellow to VIDEO IN***

Red to AUDIO R IN**

White to AUDIO L IN**

01 DX300,95,75AAGHS_EN 12-16

03.3.20, 6:14 PM

Summary of Contents for GR-DX106




























































Search results

Summary of Contents for GR-DX106

Reviews:

Related manuals for GR-DX106

Brands by name

Popular brands

JVC GR-DX106, Instructions Manual

Search results

Summary of Contents for GR-DX106

Reviews:

Related manuals for GR-DX106

Brands by name

Popular brands