EN
11
Shoulder Strap Attachment
1
Make sure the battery pack is removed. Following the
illustration, thread the strap through the eyelet
1
,
then fold it back and thread it through the buckle
2
.
Repeat the procedure to attach the other end of the
strap to the other eyelet
3
located under the Grip
Strap
. Confirm the strap is not twisted.
CAUTION:
When attaching the camera to a tripod, extend
its legs to stabilise the camcorder. It is not
advised to use small sized tripods. This may
cause damage to the unit by falling over.
1
To attach the camera to a tripod, align the direction
stud and screw to the mounting socket and stud hole
on the camera. Then tighten the screw clockwise.
Some tripods are not equipped with studs.
Tripod Mounting
2
1
3
