EN
55
Recording sound
Display
Output sound
32 kHz
FULL SOUND
Original and new tracks are combined and output in stereo.
SOUND 2
New track is output on both “L” and “R” channels in stereo.
SOUND 1
Original track is output on both “L” and “R” channels in stereo.
NOTES:
●
Audio dubbing is possible using an optional microphone connected to the external microphone input
connector (MIC).
●
While an optional microphone is connected, the built-in microphone is disabled.
●
When editing onto a tape that was recorded at 32 kHz, the old and new soundtracks are recorded separately.
●
To select the desired sound for playback, press
AUDIO MONITOR
on the remote control.
●
If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded
areas.
●
If feedback or howling occurs during TV Playback, move the camcorder’s microphone away from the TV, or
turn down the TV’s volume.
●
If you change from 32 kHz to 48 kHz in mid-recording and then use the tape for Audio Dubbing, it is not
effective from the point where 48 kHz recording began.
●
During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded at 48 kHz
or a blank portion, Audio Dubbing stops and “ERROR! REFER MANUAL” appears.
Summary of Contents for GR-DVF1
Page 70: ...MEMO ...
Page 71: ...MEMO ...
