JVC GR-DVF1, Instructions Manual

Page: 24 / 72

24
EN
RECORDING
Advanced Features (cont.)
PHOTO MODE
ID NUMBER
TALLY
System Menu Explanations
WIND CUT
SOUND MODE
DEMO. MODE OFF
ON
Allows you to set the parameters for “FULL”, “FRAME”, “PIN-UP”, “MULTI 4” and
“MULTI 9” recording (
Z
pg. 20).
The tally lamp comes on to signal the start of recording.
The tally lamp remains off at all times.
Disengages the function which cuts down on noise created by wind.
Helps cut down on noise created by wind.
•“
” appears.
•The quality of the sound will change. This is normal.
Enables recording of stereo sound on four separate channels, and is
recommended for use when performing audio dubbing.
Enables recording of stereo sound on two separate channels.
This number is necessary when connecting the camcorder to a device such as a
computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting
is 07.
Automatic demonstration will not take place.
Demonstrates certain functions such as Programme AE with special
effects, etc., and can be used to confirm how these functions operate.
When “DEMO. MODE” is set to “ON” and the Recording Menu is
closed, demonstration starts.
NOTES:
●
If a tape is in the camcorder, the demonstration cannot be turned
on.
●
By turning off the camcorder, “DEMO. MODE” is set to “OFF”
automatically.
32 kHz
48 kHz
OFF
ON
: Factory-preset
OFF
ON
DATE/TIME
ON SCREEN
Date/Time Menu Explanations
ON
OFF
DISPLAY
Keeps the camcorder’s display from appearing on the connected TV
screen.
Makes the camcorder’s display appear on screen when the
camcorder is connected to a TV.
Makes the date/time settings appear in the camcorder (
Z
pg. 19).
Keeps the date/time settings from appearing in the camcorder.
Allows you to set the current date and time (
Z
pg. 9).
ON
OFF