background image

4

 EN

SAFETY PRECAUTIONS

Do not point the lens or the viewfinder directly into
the sun. This can cause eye injuries, as well as lead
to the malfunctioning of internal circuitry. There is
also a risk of fire or electric shock.

CAUTION! 

The following notes concern possible

physical damage to the camcorder and to the user.

When carrying, be sure to always securely attach and
use the provided shoulder strap. Carrying or holding
the camcorder by the viewfinder can result in
dropping the unit, or in a malfunction.

Take care not to get your finger caught in the cassette
cover. Do not let children operate the camcorder, as
they are particularly susceptible to this type of injury.

Do not use a tripod on unsteady or unlevel surfaces.
It could tip over, causing serious damage to the
camcorder.

CAUTION! 

Connecting cables (Audio/Video,

S-Video, Editing, DC) to the camcorder and leaving
the unit on top of the TV is not recommended, as
tripping on the cables will cause the camcorder to
fall, resulting in damage.

About Batteries

DANGER! 

Do not attempt to take the batteries apart,

or expose them to flame or excessive heat, as there is
a risk of fire or explosion.

WARNING! 

Do not allow the battery terminals, or

the battery itself, to come in contact with metals, as
this can result in a short circuit and possibly start a
fire.

n

This camcorder is designed exclusively for the digital video cassette. Only cassettes marked 
can be used with this unit.

Before recording an important scene . . .

.... make sure you only use cassettes with the Mini DV mark 

.

.... remember that this camcorder is not compatible with other digital video formats.
.... remember that this camcorder is intended for private consumer use only. Any commercial use without

proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for
personal enjoyment, it is strongly recommended that you obtain permission beforehand.)

PROVIDED ACCESSORIES

•AC Power Adapter/

Charger AA-V15EK

•Remote Control Unit

RM-V712U

•Shoulder Strap

•Battery Pack

BN-V12U

• DC Cord

•S-Video Cable

• Lithium Battery

CR2025 x 2
(for clock
operation
and remote
control unit)

•MiniDV Cassette Tape

30 Min (DVM-30)
M-DV30ME

T

W

•Editing Cable

•Audio/Video

(A/V) cable

•Cable Adapter

Summary of Contents for GR-DVF1









































































Reviews: