(No.86700)2-37
2.3.6.6.2
Installation (phase adjustment)
(1) Attach the loading motor assembly to the main deck.
(2) Secure the screw (a).
(3) Solder the wire to section (a).
(4) Arrange the wire along with the position guide (b).
(5) Attach the capstan brake assembly to the main deck.
(6) Place the main deck on the guide hole (a) of the control
plate.
(7) Place the main deck on the guide hole (b) of the drive lever.
(8) Place the main deck no guide hole (c) of the control cam to
install the control cam.
(9) Move the capstan brake in the direction shown by the ar-
row (a) to attach the press lever to the shaft (a). Make sure
that the boss of the press lever fits in the control cam, and
that the shaft (b) of the pinch roller arm assembly connects
with the hole of the press lever.
(10) Attach slit washer (a) to shaft (a).
Fig.2-3-17
Screw (a)
Shaft (a)
Shaft (b)
PRESS LEVER
Slit washer (a)
Arrow (a)
Guide hole (c)
Loading motor assembly
CONTROL CAM
Guide hole (b)
Shaft (a)
CONTROL
PLATE
DRIVE
LEVER
Capstan brake assembly
Guide hole (a)
Position
guide (b)
Wire (black)
Wire (red)
Section (a)
