(No.YF087)1-7
3.2.2 ASSEMBLY/DISASSEMBLY OF CABINET PARTS AND ELECTRICAL PARTS
z
Disassembly procedure
NOTE1a:
During the procedure, leave the CASSETTE COVER (C.
COVER) open.
NOTE1b:
When removing the screw No.2, leave the JACK COVER
(DV) open. Be careful in handling the JACK COVER (DV),
as it comes off together when disassembling.
NOTE1c:
When removing the JACK COVER (DV), leave the VF AS-
SEMBLY pulled out.
NOTE4:
During the procedure, leave the CASSETTE COVER (C.
COVER) open.
NOTE5:
When removing the screw No.15, leave the JACK COVER
(DC) open.
NOTE6a:
During the procedure, be careful not to break the MAIN
BOARD parts.
NOTE6b:
When attaching the screw No.20, be careful not to damage
the FFC.
NOTE7:
When attaching, be careful with the wiring..
NOTE8:
During the procedure, leave the CASSETTE COVER (C.
COVER) open.
NOTE10a:
As the screw No.31 is located under the connector (CN10a),
pull out the connector first, before removing the screw.
NOTE10b:
During the procedure, be careful in handling the HEAT
SINK1.
NOTE10c:
When attaching, be careful with the wiring.
NOTE11a:
During the procedure, remove the GRIP BELT.
NOTE11b:
During the procedure, leave the CASSETTE COVER (C.
COVER) open.
NOTE11c:
When disassembling, be careful in handling the JACK COV-
ER (MIC) as it comes off together.
NOTE12:
During the procedure, be careful not to break the EJECT
SW.
NOTE13a:
During the procedure, be careful in handling the HEAT
SINK1.
NOTE13b:
Be careful with the wiring and the handling of the wire.
Pay special attention for the wire folding position.
NOTE15:
When attaching, be careful not to catch the FPC in between.
z
Destination of connectors
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
COVER(JIG CON)
COVER(TOP) ASSY
SHOE
CENTER COVER
REAR COVER ASSY
FRONT COVER(N-MG)ASSY
MIC ASSY
UPPER CASE ASSY
OP FRAME ASSY
LOWER ASSY
COVER(FRONT) ASSY
FRONT BOARD ASSY
MAIN BOARD ASSY
MDA BOARD ASSY
MECHA(B) ASSY
S1a,S1b,JACK COVER(DV)
S2,L2
3(S3)
4(S4),L4
3(S5a),S5b,S5c,S5d,L5a,L5b,CN5
2(S6a),3(S6b),CN6
2(S7),BKT(FRONT)
S8a,S8b,2(S8c),CN8,L8a,L8b
2(S9),CN9a,CN9b
CN10a,CN10b,CN10c,4(S10)
3(S11a),S11b,JACK COVER(MIC)
S12,L12a,L12b
3(S13a),2(L13a),SHIELD PLATE,
CN13a,b,c,S13b
CN14a,b,c,d,2(S14)
S15a,BKT(PRE-REC),3(S15b),
BKT(MECHA) ASSY
FA1
FA2
FA3
FA4
FA5
FA6
FA7
FA8
FA9
FA10-1
FA10-2
NOTE1a,b,c
-
-
NOTE4
NOTE5
NOTE6a,b
NOTE7
NOTE8
-
NOTE10a,b,c
NOTE11a,b,c
NOTE12
NOTE13a,b
-
NOTE15
STEP
No.
PART
NOTE
Fig.
No.
POINT
CN5 MAIN
CN103 REAR
CN501
40
CN6 MAIN
CN114 MIC
-
4
CN8 MAIN
CN105 MONI.OPE
CN601
45
CN9a MAIN
CN102
OP BLOCK
- 22
CN9b MAIN
CN101
CCD
CN5001 20
CN10a MAIN
CN107
FRONT
CN401 16
CN10b MAIN
CN108
CAMERA OPE
- 14
CN10c MAIN
CN112
SPEAKER
-
2
CN13a MAIN
CN104
MDA
CN305 30
CN13b MAIN
CN106
SENSOR
-
16
CN13c MAIN
CN109
HEAD
-
8
CN14a MDA
CN304
LOADING MOTOR
-
6
CN14b MDA
CN303
ROTARY ENCORDER SW -
6
CN14c MDA
CN302
DRUM MOTOR
- 11
CN14d MDA
CN301
CAPSTAN MOTOR
- 18
CN.NO.
CONNECTOR
PIN
NO.
