EN
47
Troubleshooting
ENGLISH
Warning Indication
Meaning / Remedy
High
Exhausted
• Displays the battery remaining power.
• As the battery power comes close to nil, the battery remaining power
indicator blinks. When the battery power is exhausted, power turns
off automatically.
SET TO MANUAL MODE
• Appears when you attempt to change “Menu Settings”, “Backlight
Compensation” or “Manual Focus” while in AUTO mode
A
. (
20)
TAPE END
• Appears when the tape ends during recording or playback.
LENS CAP
• Appears for 5 seconds after power is turned on if the lens cap is
attached or when it is dark.
SET DATE/TIME!
• Appears when the date/time is not set. (
17).
• The built-in clock battery has run out and the previously set date/time
has been erased. Consult your nearest JVC dealer for replacement.
• Appears if a tape is loaded while the Power Switch is set to “
REC
”.
• Blinks when no tape is loaded.
CHECK TAPE’S ERASE
PROTECTION TAB
• Appears when the erase protection tab is set to “SAVE” while the
Power Switch is set to “
REC
”.
A. DUB ERROR!
<CANNOT DUB ON A LP
RECORDED TAPE>
<CANNOT DUB ON A
16BIT RECORDING>
<CHECK TAPE’S ERASE
PROTECTION TAB>
• Appears if Audio Dubbing is attempted on a blank portion of a tape.
(
44)
• Appears if Audio Dubbing is attempted on a tape recorded in the LP
(
44)
• Appears if Audio Dubbing is attempted on a tape recorded in 16-BIT
audio. (
44)
• Appears if
A.DUB
(
D
) on the remote control is pressed when the
erase protection tab is set to “SAVE”. (
44)
INSERT ERROR!
<CANNOT EDIT ON A
LP RECORDED TAPE>
<CHECK TAPE’S ERASE
PROTECTION TAB>
<CANNOT EDIT ON A
BLANK PORTION>
• Appears if Insert Editing is attempted on a tape recorded in the LP
mode. (
44)
• Appears if
INSERT
(
I
) on the remote control is pressed when the
erase protection tab is set to “SAVE”. (
44)
• Appears if Inset Editing is attempted on a blank portion of a tape.
(
44)
MEMORY IS
FULL
• Appears when the memory card’s memory is full and shooting is not
possible.
UNIT IN SAFEGUARD
MODE REMOVE AND
REATTACH BATTERY
OR DC PLUG
• Error indications 01, 02 or 06.
Remedy: Remove and reattach the power supply or battery.*
UNIT IN SAFEGUARD
MODE EJECT AND
REINSERT TAPE
• Error indications 03 or 04.
Remedy: Eject the cassette and reinsert.*
* The camcorder turns off automatically. Re-check if the indication clears. When it does, you can
resume using the camcorder. If the indication remains, consult your nearest JVC dealer.
GR-D850&870AG_EN.indb 47
GR-D850&870AG_EN.indb 47
11/23/2007 4:57:16 PM
11/23/2007 4:57:16 PM
