EN
41
Connections/Editing
ENGLISH
Connections To A TV Or VCR
1
Yellow to VIDEO IN (Connect when your
TV/VCR has only A/V input connectors).
2
Red to AUDIO R IN*
3
White to AUDIO L IN*
4
To S-VIDEO IN (Connect when your
TV/VCR has S-VIDEO IN and AV input
connectors. In this case, it is not necessary
to connect the yellow video cable.)
* Not required for watching still images only.
Note:
The S-Video cable is optional. Be sure to
use the YTU94146A S-Video cable. Consult
the JVC Service Centre described on the
sheet included in the package for details on
its availability. Make sure to connect the end
with a core fi lter to the camera. The core fi lter
reduces interference.
1
Make sure all units are turned off.
2
2
Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR
, go to step
3
3
.
If not
, go to step
4
4
.
To AV
connector
S Cable
(optional)
3
3
Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.
4
4
Turn on the camcorder, the VCR and the
TV.
5
5
Set the VCR to its AUX input mode, and
set the TV to its VIDEO mode.
6
6
Start playback on the camcorder (
21).
• Please set “WIDE TV” of Playback Menus
so that the image may suit your TV (16:9
TV or 4:3 TV) (
29, 32).
To choose whether or not the following
displays appear on the connected TV
• Date/Time
Set “DATE/TIME” to “ON”, “AUTO” or “OFF”
(
32).
• Time
Code
Set “TIME CODE” to “ON” or “OFF” (
32).
• On
Screen
Set “ON SCREEN” to “OFF”, “LCD” or
“LCD/TV” (
32).
Notes:
•
It is recommended to use the AC Adapter
as the power supply instead of the battery
pack. (
16)
• To monitor the picture and sound from
the camcorder without inserting a tape or
memory card, set the camcorder’s
Power Switch to “
REC
”, then set your TV to the
appropriate input mode.
• Make sure you adjust the TV sound volume to
its minimum level to avoid a sudden burst of
sound when the camcorder is turned on.
Dubbing To A VCR
To use this camcorder as a player
1
1
Following the illustration,
41,
“Connections To A TV Or VCR”, connect
the camcorder and the VCR’s input
connectors.
2
2
Perform
steps
1
–
6
6
“Connections To A TV
Or VCR” (
41).
3
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
4
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
1
6
7
7
or
Audio/Video cable
(provided)
VCR
TV
GR-D850&870AG_EN.indb 41
GR-D850&870AG_EN.indb 41
11/23/2007 4:57:12 PM
11/23/2007 4:57:12 PM
