EDITING
34
EN
MasterPage: Left
To use this camcorder as a recorder
1
Make sure all units are turned off.
2
Connect this camcorder to a video unit
equipped with a DV output connector using a DV
cable as shown in the illustration.
3
Set the camcorder's Power Switch to
“PLAY”
.
4
Set
“REC MODE”
to
“SP”
or
“LP”
5
Press the Recording Start/Stop Button to
engage the Record-Pause mode.
●
The “
” indication appears on the screen.
6
Start playback on the player.
7
At the point you want to start dubbing, press
the Recording Start/Stop Button again to stop
dubbing. The
T
indication rotates.
8
Press the Recording Start/Stop Button again
to stop dubbing. The
T
indication stops rotating.
9
Press
8
to return to the normal playback
mode.
NOTE:
Digital Dubbing is performed in the sound mode
recorded on the original tape, regardless of the
current “SOUND MODE” setting.
Appears if dubbing of copyguarded signals is
attempted while this camcorder is being used as
a recorder.
It is also possible to transfer still/moving images
to a PC with a DV connector by using the
provided software, software equipped with the
PC or commercially available software.
If you are using a Windows
®
XP, you can use
Windows
®
Messenger to conduct video
conferences over the Internet, using a
camcorder. For details, refer to the help for the
Windows
®
Messenger.
NOTES:
●
It is recommended to use the AC Adapter as the
power supply instead of the battery pack. (
●
When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable
depending on the type of DV connector (4 or 6 pins)
on the PC.
●
The date/time information cannot be captured into the
PC.
●
Refer to the instruction manuals of the PC and
Software.
●
The still images can also be transferred to a PC with a
DV connector-equipped capture board.
●
The system may not work properly depending on the
PC or capture board you are using.
●
If, after connecting a DV cable to the camcorder and it
doesn't work, restart the camcorder.
COPY PORTECTED
Connection To A Personal Computer
DV IN
When connecting the camcorder to a PC using a
DV cable, make sure to follow the procedure below.
Connecting the cable incorrectly may cause
malfunctions to the camcorder and/or the PC.
●
Connect the DV cable first to the PC, and then to
the camcorder.
●
Connect the DV cable (plugs) correctly according
to the shape of the DV connector.
PC with DV connector
To DV IN/OUT
To DV connector
Core filter
Core filter
DV cable (optional)
or
GR-D750AA.book Page 34 Tuesday, January 30, 2007 5:41 PM
