EN
25
MENUS FOR DETAILED ADJUSTMENT
MasterPage: Start_Right
VTR
[SP]*
: To record in the SP (Standard Play) mode
LP
: Long Play - more economical, providing 1.5
times the recording time.
* SP indicator does not appear on the screen.
NOTES:
●
If the recording mode is switched, the playback
picture will be blurred at the switching point.
●
It is recommended that tapes recorded in the LP
mode on this camcorder be played back on this
camcorder.
●
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there
may be momentary pauses in the sound.
[12BIT]
: Enables video recording of stereo
sound on four separate channels, (equivalent to
the 32 kHz mode of previous models)
16BIT
: Enables video recording of stereo sound
on two separate channels. (Equivalent to the
48 kHz mode of previous models)
DISPLAY
The “DISPLAY”
settings except (“CLOCK ADJ.”,
“16:9 OUTPUT” and “BRIGHT”) are effective
only for shooting.
LCD
: Keeps the camcorder’s display (except the
date, time and time code) from appearing on the
connected TV screen.
[LCD/TV]
: Makes the camcorder’s display
appear on screen when the camcorder is
connected to a TV.
[OFF]
: The date/time does not appear.
ON
: The date/time is always displayed.
pg. 14, “Date/Time Settings”
[OFF]
: Time code is not displayed.
ON
: Time code is displayed on the camcorder and
on the connected TV. Frame numbers are not
displayed during recording. (
To enable your tv to display images in 16:9 wide
mode, set the tv screen size correctly.
4:3TV
:
For TV with an aspect ratio of 4:3.
[16:9TV]
:
For TV with an aspect ratio of 16:9.
pg. 14, “Brightness Adjustment Of The
Display”
REC MODE
SOUND MODE
ON SCREEN
DATE/TIME
CLOCK ADJ.
TIME CODE
16:9 OUTPUT
BRIGHT
CONTINUED ON NEXT PAGE
GR-D750AA.book Page 25 Tuesday, January 30, 2007 5:41 PM
