JVC GR-D750AA, Getting Started Manual

Page: 30 / 40

FEATURES FOR RECORDING
30
EN
MasterPage: Left
Selection of a spot metering area enables more
precise exposure compensation.
1
Set the Power Switch to “REC” .
2
Set the recording mode to “
M
”. (
墌
pg. 19)
3
Press twice so that the Spot Exposure
Control indicator “ ” appears.
●
A spot metering area frame appears at the
centre of the LCD monitor/viewfinder.
4
Press SET .
●
Spot Exposure Control is engaged.
●
Exposure is adjusted to make the brightness of
the selected area most appropriate.
To lock the iris
After step
3
, press and hold SET over 2
seconds. The “ ” indication appears and the
iris is locked.
To cancel Spot Exposure Control
Press once so that the “ ” indicator
disappears.
NOTES:
●
Depending on the shooting location and condition,
optimum result may not be attained.
●
“STROBE” in “EFFECT” cannot be used with Spot
Exposure Control.
The white balance refers to the correctness of
colour reproduction under various lighting. If the
white balance is correct, all other colours will be
accurately reproduced.
The white balance is usually adjusted
automatically. However, more advanced
camcorder operators control this function
manually to achieve a more professional colour/
tint reproduction.
To change the setting
Set “W.BALANCE” to the desired mode.
●
The selected mode indicator except “AUTO”
appears.
[AUTO] : White balance is adjusted
automatically.
MWB : Adjust the white balance manually
when shooting under various types of lighting.
“Manual White Balance Adjustment” (
墌
pg. 31).
FINE : Outdoors on a sunny day.
CLOUD : Outdoors on a cloudy day.
HALOGEN : A video light or similar type of
lighting is used.
Spot Exposure Control White Balance Adjustment
GR-D750AA.book Page 30 Tuesday, January 30, 2007 5:41 PM