(No.86700)2-13
2.1.5.11 [35] DRUM BASE ASSY
[36] CAPSTAN MOTOR
[37] MAIN DECK ASSY
NOTES 35a/36:
Since [36]CAPSTAN MOTOR is attached to [35]DRUM BASE
ASSY, remove [36]CAPSTAN MOTOR together with
[35]DRUM BASE ASSY when removing [36]CAPSTAN MO-
TOR.
[36]CAPSTAN MOTOR should not be separated from
[35]DRUM BASE ASSY except when replacing them.
NOTE 35b:
It is very important to attach [35]DRUM BASE ASSY to the
proper position.
Especially, improper engagement of [36]CAPSTAN MOTOR
with [34]REEL GEAR 1 causes operational defection or abnor-
mal sound. Therefore, confirm the attachment position before
disassembly procedure.
See the following figure as for the proper attachment position.
Fig.2-1-24
NG
OK
NG
NOTE 35b
When [35]DRUM BASE ASSY
is properly attached, the screw
hole tends to be located at the
center of the oval.
W h e n t h e s c r e w h o l e i s
located far from the center of
the oval, operational defection
or abnormal sound may occur.
Before removing [35]DRUM
B A S E A S S Y , c o n f i r m t h e
position of [35]DRUM BASE
ASSY by seeing the length
(A), as shown in the left figure.
When reattaching [35]DRUM
B A S E A S S Y , c o n f i r m t h e
position to reattach [35]DRUM
BASE ASSY by seeing the
length (A). Be sure to reattach
[35]DRUM BASE ASSY to the
same position as it has been
before the removing proce-
dure.
(A)
(S35)
27
(S35)
28
(S36)
30
(S35)
29
[35]
[36]
[37]
NOTE 35b
NOTE 35a
NOTE 36
*
*
**
*
* 0.078 N.m (0.8 kgf.cm)
** 0.039 N.m (0.4 kgf.cm)