2-20 (No.86700)
2.1.10 REMARKS
2.1.10.1 Cleaning
(1) For cleaning of the upper drum (particularly video heads),
use fine-woven cotton cloth with alcohol soaks through. Do
not move the cloth but turn the upper drum counterclock-
wise.
NOTE:
Make sure not to move the cloth in the vertical direction
to the video head, since it may cause damage of the video
heads.
(2) For cleaning of parts of the tape transport system except
the upper drum, use fine-woven cotton cloth or cotton swab
soaked alcohol.
(3) After cleaning, confirm that the cleaned parts are complete-
ly dry before loading the deck with cassette tape.
2.1.10.2 Applying oil and grease
(1) Periodical oiling and greasing are not required but should
be done to new parts when replacing. If oil and grease on
the other parts of the other party are old and dirty, wipe
them clean and apply new oil or grease.
(2) For parts and points to apply oil and grease, refer to the ex-
ploded view of the 3.1 DVC MECHANISM ASSEMBLY.
Fig.2-1-32 specifies oil and grease to be used.
(3) When oiling, clean the objective parts with alcohol first and
apply one or two drop(s) of oil. Too much oiling causes ro-
tary parts to slip because of oil leakage.
specifies oil and grease to be used
Fig.2-1-32
Classification
Part No.
Symbol in drawing
Grease
KYODO-SH-JB
AA
Oil
YTU94027
BB
Grease (HANARL)
RX-410R
CC
