31
Set up TIMER
Setup
Signal
Screensaver
Component/RGB-in select
RGB
OSD Language
English (UK)
3D Y/C Filter (NTSC)
Colour system
3:2 Pulldown
On
Auto
Off
Aspect Auto (4:3)
4 : 3
Signal
[ AV ]
Signal
[ Component ]
3:2 Pulldown
Off
Setup for Input Signals
Colour system / Aspect Auto
Select Signal from the “Setup” menu during AV(S Video) input
signal mode. (“Signal [AV]” menu is displayed.)
Press to select the “Colour system” or
“Aspect Auto”.
Press to select each functions.
3D Y/C Filter (NTSC)
Colour system
3:2 Pulldown
On
Auto
Off
Aspect Auto (4:3)
4 : 3
Signal
[ AV ]
If the picture image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
Set up TIMER
Setup
Signal
Screensaver
Component/RGB-in select
RGB
OSD Language
English (UK)
Press
(ACTION) button
3:2 Pulldown
Select “Signal” from the “Setup” menu during AV(S Video) or Component input
signal mode.(“Signal [AV]” menu is displayed.)
Press to select 3:2 Pulldown.
Press to set On/Off.
Press to exit from adjust mode.
R
Press
(ACTION) button
Note:
When On, this setting only affects the following signal input.
• NTSC signal input during “AV(S Video)” input signal mode.
• 525i(480i) signal input during “Component” input signal mode.
When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which
are recorded at 24 frames per second.
If the picture is not stable, turn the setting to off.
Mode
Colour system
Aspect Auto
(4:3)
Function
Set the colour system to match that of the input signal.
If set to “Auto”, the colour system is automatically selected from “PAL”, “SECAM” and
“NTSC”, but not from “M-NTSC”. To view M-NTSC format pictures, you must manually
set to “M-NTSC”.
Set to “4 : 3” to view 4:3 images in an unchanged format when Aspect Auto is selected.
If you would like to view 4:3 images in Just format, set to “Just”.
Auto PAL SECAM M.NTSC NTSC