JVC GC-QX3U, Service Manual, Page: 11 / 164

1-6
1.3.3 Disassembly method ( II ) <OP Unit>
Fig. 1-3-3
206
203
208
206
223
226
221
225
224
202
230
231
231
237
232
204
205
207
237
233
208
236
234
234
222
227
229
228
CCD Board Assembly
SD1
1
1
2
4
2
2
4
4
4
S2
STEP
1
STEP
2
STEP
4
Remove screw marks
Note 1
Turn and fix the set ring and make sure that the convex marks
are identical.
NOTE2
NOTE3
SET SCREW
STEP POINT
PART NAME
NOTE
1
OP Block ASSEMBLY Remove screws 3 (208)
2
COVER Remove screws 3 (206),2 (207),
CCD BASE ASSEMBLY 1 (236)
SPACER Remove screws 3(206),2(207).
SET PLATE Remove the CCD Board Assy
20(SD1)
3
TILT FRAME Remove the SET RING Note 1
RATCH GEAR 2 (231) Note 2
MAIN PIN Note 3
4
RATCH MAGNET Remove Screws Note 4
NUT ASSEMBLY 3 (237),1 (236)
RATCH PIECE
Note 2
Make sure that the torsion spring is in the groove of the
latch gear.
Note 3
Turn the latch gear clockwise (
) and position it so that
the toothless portion comes to the level that is as high as
the main frame.
Note 4
Never move the setscrew in the
center of the nut assembly!