20
ENGLISH
Menu item
Selectable setting/item
Fader/Balance
Back
Fader/Balance
Reset
Fader 0
Balance 0
Fader
: Adjust the front and rear speaker output balance.
♦
F6
to
R6;
Initial
0
• When using a two-speaker system, set the fader to the center (
0
).
Balance
: Adjust the left and right speaker output balance.
♦
L6
to
R6;
Initial
0
Press [
5
/
∞
/
2
/
3
] or drag [
] to adjust.
Volume Adjust
*
1
Adjust and store the auto-adjustment volume level for each source, comparing
to the FM volume level. The volume level will automatically increase or decrease
when you change the source.
• <
Fix
> appears if an FM broadcast is selected as the source.
♦
–12
to
+12
;
Initial
00
Subwoofer Level
Adjust the subwoofer output level.
♦
–06
to
+08;
Initial
00
High Pass Filter
♦
Through
♦
On
:
Select when the subwoofer is not connected.
:
Select when the subwoofer is connected.
Crossover
Select the crossover frequency between the front/rear speakers and the
subwoofer.
♦
80Hz, 120Hz, 150Hz
Amplifier Gain
*
2
You can change the maximum volume level of this unit.
♦
Off
♦
Low
♦
High
:
Deactivates the built-in amplifier.
:
VOL 00 to 30 (Select this if the maximum power of the
speakers is less than 50 W.)
:
VOL 00 to 50
Rear Speaker
*
3
You can activate/deactivate the rear speakers.
♦
On
♦
Off
:
Activate the rear speakers.
:
Deactivate the rear speakers.
*
1
For “
DISC/USB
”: You can make the adjustments separately depending on the audio format—Dolby digital/MPEG
Audio and the others.
*
2
The volume level automatically changes to “VOL 30” if you change to <
Low
> with the volume level set higher than
“VOL 30.”
*
3
This setting takes effect only when Dual Zone is activated. (
37)
Initial:
Underlined
Sound
EN_KW-AVX820[J].indb 20
EN_KW-AVX820[J].indb 20
09.1.12 1:17:44 PM
09.1.12 1:17:44 PM
