JVC EXAD KD-SHX701 Instructions Manual Download Page 77

Page: 77 / 140

ENGLISH

(eject) /

(angle) button

• Open/close the control panel (and eject

the disc, if any, when opened).

• Adjust the control panel angle if held

then pressed.

Remote sensor

DO NOT expose the remote sensor on
the control panel to strong light (direct
sunlight or artificial lighting).

TP/PTY button

Activates or deactivates TA Standby
Reception (and Road Traffic News
Standby Reception).

SOURCE button

Select the source.

( / ) buttons

• Searches for stations (Auto Search) if

pressed, or
Skips frequencies after pressed and held
(Manual Search).

• Change the tracks on the disc.
• On the control panel only: while

operating the Menus, it works to select
the Menu items/values.

Color display window

Reset button

Reset the built-in microcomputer.

Volume (VOL) +/– button(s)

Adjust the volume level.

(Standby/On/Attenuator)

button

Turns on and off the power, and also
attenuates the sounds.

DISP (BACK) button

• Change the information shown on the

display.

• When operating the Menus, it works as

the BACK button (to go back to the
previous step).

BAND (OK) button

• Select the band for FM/AM and DAB.
• When operating the Menus, it works as

the OK button (to confirm your
selection).

MENU button

Show the Main Menu (or erase it).

∞

buttons

• Change the services for DAB.
• Change the folder on the MP3/WMA

discs.

• On the control panel only: while

operating the Menus, it works to select
the Menu items/values.

(control panel release) button

Detach the control panel.

Number buttons

• Select the preset station (or a service) if

pressed, or store a station (or a service)
if pressed and held.

• Select the tracks while playing CDs.
• Select the folders while playing MP3/

WMA discs.

• Select the discs while operating the CD

changer.

ANGLE button

Adjust the control panel angle.

BAND button

Select the band for FM/AM and DAB.

02-07_KD-SHX701_f.p65

4/1/04, 1:19 PM

Summary of Contents for EXAD KD-SHX701













































































































































Search results

Summary of Contents for EXAD KD-SHX701

Reviews:

Related manuals for EXAD KD-SHX701

Brands by name

Popular brands

JVC EXAD KD-SHX701, Instructions Manual

Search results

Summary of Contents for EXAD KD-SHX701

Reviews:

Related manuals for EXAD KD-SHX701

Brands by name

Popular brands