JVC Everio GZ-MG465 Manual Book Download Page 17

Page: 17 / 228

ENGLISH

Language Setting

The language on the display can be changed.

Open the LCD monitor to turn on the
camera.

Touch the MENU button.

Select [BASIC SETTINGS].

Select [LANGUAGE].

Select the desired language.

To return to the previous screen

Select

To quit the screen

Touch the

MENU

button.

Date/Time Setting

Open the LCD monitor to turn on the
camera.

When [SET DATE/TIME!] appears,
select [YES] within 10 seconds.

If you do not select within 10 seconds, the
screen disappears. In such case, press
the

POWER

button and turn the camera

on again.

Set the date and time.

Repeat this step to input the month, day,
year, hour and minute.

Touch the OK button to fi nish.

To change the date and time

1) Touch the

MENU

button.

2) Select [BASIC SETTINGS], and then

[CLOCK ADJUST].

3) Set the date and time.

To return to the previous screen

Select

To quit the screen

Touch the

MENU

button.

You have now fi nished confi guring the
necessary settings.

To use the camera right away

See page 20.

To confi gure other settings

See page 18.

Summary of Contents for Everio GZ-MG465





































































































































































































































Search results

Summary of Contents for Everio GZ-MG465

Reviews:

Related manuals for Everio GZ-MG465

Brands by name

Popular brands

JVC Everio GZ-MG465, Manual Book

Search results

Summary of Contents for Everio GZ-MG465

Reviews:

Related manuals for Everio GZ-MG465

Brands by name

Popular brands