JVC DT-V17L3R, Instructions Manual

Page: 10 / 24

ENGLISH
9
7
Available signals
The following signals are available for this monitor.
Video signals
No. Signal name
Signal format shown in
the status display
(
☞
page 7)
Input terminal
E. AUDIO HD/SD SDI
(IN 1, IN 2)* 1
DVI-D (HDCP)
(Digital component/digital
RGB)
1 480/60i 480/60i √ √
2 576/50i 576/50i √ √
3 480/60p 480/60p — √
4 576/50p 576/50p — √
5 640 * 480/60p 640 * 480/60p —
√
6 720/60p 720/60p √ √
7 720/50p 720/50p
√ √
8 720/30p 720/30p √ —
9 720/25p 720/25p √ —
10 720/24p 720/24p √ —
11 1080/60i 1080/60i √ √
12 1035/60i 1035/60i
√
√ *
2
13 1080/50i 1080/50i √ √
14 1080/60p 1080/60p —
√
15 1080/50p 1080/50p — √
16 1080/30p 1080/30p √ √
17 1080/25p 1080/25p √ √
18 1080/24p 1080/24p √ √
19 1080/30psF 1080/60i √ *
2
—
20 1080/24psF 1080/24psf √ —
* 1 Compatible with EMBEDDED AUDIO signals
* 2 The signal is recognized as 1080/60i.
Computer signals (preset)
DVI-D (HDCP) terminals
No. Signal name
Resolution Frequency
Scan system
Horizontal Vertical Horizontal (kHz) Vertical (Hz)
1 VGA60 640 480 31.5 59.9 Non-interlace
2 WVGA60 852 480 31.5 59.9 Non-interlace
3 SVGA60 800 600 37.9 60.3 Non-interlace
4 XGA60 1024 768 48.4 60.0 Non-interlace
5 WXGA (1280) 1280 768 47.8 60.0 Non-interlace
6 WXGA+60 1440 900 55.9 60.0 Non-interlace
7 SXGA60*
3
1280 1024 64.0 60.0 Non-interlace
8 WSXGA+60* 3 1680 1050 65.2 60.0 Non-interlace
9 UXGA60*
3
1600 1200 75.0 60.0 Non-interlace
10 WUXGA60* 3 1920 1200 74.0 60.0 Non-interlace
11 720/60p 1280 720 45.0 60.0 Non-interlace
12 1080/60p* 3 1920 1080 67.5 60.0 Non-interlace
13 720/50p 1280 720 37.5 50.0 Non-interlace
14 1080/50p*
3
1920 1080 56.25 50.0 Non-interlace
*
3
When No. 7–10, 12 and 14 signals come in, thin lines will become obscured because their signal resolution is higher
than the screen resolution.
• Non-preset signals may not be displayed normally even if their frequency is within the acceptable range (
☞
“Horizontal/vertical frequency (computer signal)” on page 21).
• When a preset signal comes in, the signal format is shown on the status display. For other signals, the
resolution is shown.
Specification of the DVI-D (HDCP) terminal
Connect it to the DVI-D output terminal on a personal computer.
Pin No. Input signal Pin No. Input signal Pin No. Input signal
1 T.M.D.S Data 2– 9 T.M.D.S Data 1– 17 T.M.D.S Data 0–
2 T.M.D.S Data 2+ 10 T.M.D.S Data 1+ 18 T.M.D.S Data 0+
3 T.M.D.S Data 2 shield 11 T.M.D.S Data 1 shield 19 T.M.D.S Data 0 shield
4 NC 12 NC 20 NC
5 NC 13 NC 21 NC
6 DDC Clock 14 +5 V Power 22 T.M.D.S Clock shield
7 DDC Data 15 GND 23 T.M.D.S Clock+
8 NC 16 Hot Plug Detect 24 T.M.D.S Clock–
√ : Acceptable
—: Not acceptable
DT-V17L3REB̲EN.indd 9 DT-V17L3REB̲EN.indd 9 08.9.18 5:27:36 PM 08.9.18 5:27:36 PM