ENGLISH
21
• For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed,
and may be slightly different from actual products.
• Design and specifications are subject to change without notice.
• All company names and product names mentioned herein are used for identification purposes only, and
may be the trademarks or registered trademarks of their respective companies.
Specifications
7
General
Model name
DT-V17L3R
Type
Multi format LCD monitor
Screen size
Type 17 wide format
Aspect ratio
16:10
LCD panel
17˝ wide, active matrix TFT
Effective screen size
Width: 367.2 mm (14 7/16˝)
Height: 229.5 mm (9˝)
Number of pixels displayed
1 440 x 900
Number of colors displayed
16.77 million
Viewing angle (TYP.)
160° (Horizontally), 140° (Vertically)
Panel brightness (TYP.)
400 cd/m
2
Contrast ratio (TYP.)
600:1
Horizontal/vertical frequency
(computer signal)
H: 31.469 kHz – 75.000 kHz
V: 48 Hz – 65 Hz
* Some signals within this frequency range may not be displayed (“Out of
range” is displayed).
Compliant video signal format
☞
“Available signals” on page 9
Format
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.656: 525/625
SMPTE259M:
525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Operating conditions
Operating temperature: 5°C – 35°C (41°F – 95°F)
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
Power requirements
AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz
Rated current
0.56 A (AC 120 V)/0.36 A (AC 220 – 240 V)
External dimensions
(excluding protruding parts)
Width:
395 mm (15 5/8˝) (with the stand), 395 mm (15 5/8˝) (without the stand)
Height:
344.8 mm (13 5/8˝) (with the stand), 304 mm (12˝) (without the stand)
Depth:
199 mm (7 7/8˝) (with the stand), 86 mm (3 1/2˝) (without the stand)
Weight
6.8 k
g
(15.0 lbs) (with the stand)
5.1 k
g
(11.2 lbs) (without the stand)
Accessories
AC power cord, Power cord holder x 1, Screw x 2 (for power cord holder)
7
Input/output terminals
V
ideo
DVI-D (HDCP)
DVI-D signal input (compatible with HDCP):
DVI-D connector x 1 (compatible with DDC2B)
E. AUDIO HD/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO signals):
auto detection, 1 line, BNC connector x 1
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI
(SWITCHED OUT)
Digital signal output (compatible with EMBEDDED AUDIO signals):
1 line switched out, BNC connector x 1
External
control
REMOTE (MAKE/TRIGGER)
☞
“Using the MAKE/TRIGGER system” on page 17
REMOTE (RS-485)
☞
“Using the serial communication” on page 18
REMOTE (RS-232C)
Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.
DT-V17L3REB̲EN.indd 21
DT-V17L3REB̲EN.indd 21
08.9.18 5:28:01 PM
08.9.18 5:28:01 PM
