Masterpage:Right0
EN
47
Filename [MH30_20SEK_09Timer Recording.fm]
Page 47Thursday, 7 April 2005 10:54
TIMER RECORDING
You can programme this unit to timer record as many as
16 programmes.
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the PlusCode number.
1
Load a recordable disc if recording to DVD.
2
Press
PROGRAMME
to access the programme top screen.
3
Press
selection keys
to select
A
VIDEO PLUS+
B
, then press
ENTER
.
●
When
A
PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMES
B
appears on the TV screen, you need to
cancel some of the reserved programmes. (
A
pg. 50)
4
Press the
number keys
to enter the PlusCode
number of a programme
you wish to record.
OR
Press
selection keys
to
select the desired
number key on the
screen, then press
ENTER
. Repeat to enter
all required numbers.
●
If you have made a mistake, press
selection keys
to select
A
DELETE
B
or
A
DELETE ALL
B
, then press
ENTER
and input the
correct number before you press
ENTER
again.
5
Press
selection keys
to select
A
RECORD TO
B
, then press
ENTER
. Press
selection keys
to select the desired recording
deck, then press
ENTER
.
6
Press
selection keys
to select
A
CONFIRM
B
, then press
ENTER
.
●
If the number you entered is invalid,
A
PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY
B
appears on the TV
screen. Input a valid PlusCode number.
●
If
A
GUIDE PROGRAMME IS NOT SET SET GUIDE
PROGRAMME THEN RETRY
B
appears on the TV screen, set
Guide Programme Numbers manually. (
A
pg. 74)
7
The PlusCode number you entered and the matching timer
recording information are displayed on the TV screen. Check
the programme data.
●
To cancel this setting, press
RETURN
.
8
Press
selection keys
to select the desired recording option as
required. Press
selection keys
to select the desired setting,
then press
ENTER
.
●
A
INPUT TITLE
B
(
A
pg. 54,
A
Modify Title Name
B
)
●
A
CATEGORY
B
(
A
pg. 54,
A
Modify Category
B
)
●
A
VPS/PDC
B
(
A
pg. 48,
A
VPS/PDC Recording
B
)
●
A
WEEKLY/DAILY
B
(
A
pg. 48,
A
Weekly/Daily Recording
B
)
●
A
REC MODE
B
(
A
pg. 37,
A
Recording Mode
B
)
9
Press
selection keys
to select
A
OK
B
, then press
ENTER
to
access the Programme Confirmation screen.
10
Press
selection keys
to select
A
EXIT
B
, then press
ENTER
to
complete timer programming.
●
To programme another timer, press
selection keys
to select
A
CONTINUE
B
, then press
ENTER
.
●
If
A
PROGRAMME OVERLAPPED
B
appears on the TV screen,
delete or modify the programmes.
NOTES:
●
There may be cases that the VIDEO Plus+
®
Timer Programming
function prolongs the stop time of the programming.
●
When two successive programmes are recorded on a DVD-RW
disc with the VIDEO Plus+
®
Timer Programming function, the
beginning of the second one may be left off the recording.
●
If the copy limited programme is received during timer recording,
the unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
VIDEO Plus+ Timer Programming
●
Make sure that the unit’s built-in clock is set properly.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
PROGRAMME
DISPLAY
0 – 9
VPS/PDC
#
RETURN
FGDE
ENTER
CABLE/SAT
DVD
TV
Selection Keys
PLUSCODE NO.
1 2 3 4
1 2
4 5 6
7 8 9
0
3
1
2
3
1
2
2
3
ENTER
SELECT
PROGRAMME
EXIT
PROGRAMME > SHOWVIEW (1/2)
RECORD TO
DVD
CONFIRM
DELETE
DELETE ALL
PRESS [PROGRAMME]
TO EXIT
SELECT WITH @
THEN PRESS [ENTER]
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see
A
VIDEO Plus+ System Setup
B
(
A
pg. 74)
and set the Guide Programme number correctly.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, the wrong channel
number will be displayed on the VIDEO Plus+ programme
screen in step
7
. When this happens, set the correct Guide
Programme number for that station. (
A
pg. 74,
A
VIDEO Plus+
System Setup
B
)
Satellite Receiver Users
To timer record a satellite broadcast using the VIDEO Plus+
system:
A
Perform
A
Satellite Receiver Control Setting
B
(
A
pg. 24).
B
Perform
A
VIDEO Plus+ Timer Programming
B
(
A
pg. 47).
C
Leave the satellite receiver’s power on.
MH30_20SEK_00.book Page 47 Thursday, April 7, 2005 10:54 AM