Masterpage:Right-No-Heading
EN
31
Filename [DR-M10SE_07Playback.fm]
Page 31
March 4, 2004 2:55 pm
High-Speed Search
During playback, press
5
for forward high-speed
search, or
3
for reverse high-speed search.
●
Each press of the button increases the search speed for each
direction.
●
To resume normal playback, press
4
.
OR
During playback, press and hold
6
for 2 or more
seconds for forward high-speed search, or press and hold
2
for 2 or more seconds for reverse high-speed search.
●
Releasing the button resumes normal playback.
Still Picture/Frame-By-Frame
Playback
1
Pause during playback.
Press
9
.
2
Activate frame-by-frame playback.
Press
9
.
●
Each press of
9
advances the still picture frame by frame.
OR
Press
w e
.
●
Each press of
w e
advances/reverses the still picture frame by
frame.
●
Frame-by-frame playback for reverse direction cannot be
performed with Video CD/SVCD discs.
●
To resume normal playback, press
4
.
Slow Motion
While paused, press
SLOW –
or
SLOW +
.
●
Each press of
SLOW –
or
SLOW +
increases the slow motion
speed for each direction (from 1/16 to 1/2 times the normal
speed).
●
Slow motion for reverse direction cannot be performed with
Video CD/SVCD discs.
OR
Press
2
or
6
for 2 or more seconds.
Skip Search
During playback, press
.
●
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
Resume Function
It is possible to memorise the position where you stop playback
and resume playback from that position.
●
Be sure to set “RESUME” to “ON” or “DISC RESUME”.
(
墌
pg. 96)
1
Memorize a resume point.
Press
8
during playback.
●
The unit enters Resume Stop mode and memorises the
position where you have stopped playback as a resume point.
(The inside of the disc status indicator on the front display
panel blinks in the Resume Stop mode.)
●
The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected if
“RESUME” is set to “DISC RESUME”. (
墌
pg. 96)
●
To clear the resume points:
(The inside of the disc status indicator stops blinking and
lights.)
When “RESUME” is set to “ON”:
• Press
1
on the unit or
DVD
1
on the remote control to
turn off the unit.
• Press
x
to take out the disc.
• Press
8
in stop mode.
• Press
TOP MENU
to display the top menu, then start
playback by selecting an item, etc.
• Press
MENU
to display the disc menu, then start playback by
selecting an item, etc.
When “RESUME” is set to “DISC RESUME”:
• Set “RESUME” to “OFF”. (
墌
pg. 96)
• Press
8
in stop mode.
• Press
TOP MENU
to display the top menu, then start
playback by selecting an item, etc.
• Press
MENU
to display the disc menu, then start playback by
selecting an item, etc.
2
Resume playback.
Press
4
in stop mode. The unit starts playback from the
resume point.
NOTES:
●
“DISC RESUME” setting works on DVD VIDEO, VCD, SVCD
and already finalised DVD-R/DVD-RW (video mode) discs. For
other types of discs, the function under “ON” setting will be
applied even if “RESUME” is set to “DISC RESUME”.
●
If you stop the playback of a disc for which an resume point
has already been memorized, the memory will be updated
with the new resume point.
●
After the unit has memorized the resume point for 30 discs,
remembering a new resume point will cause the unit to delete
the oldest memorized point. Stopping playback of a disc for
which a resume point is already stored may change the order
in which the points are stored. This may potentially change the
order in which points are deleted.
●
When the unit memorizes a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
●
This function may not work for some Video CD or SVCD.
●
When “RESUME” is changed to “ON” or “OFF”, resume
points of the discs memorized with “RESUME” set to “DISC
RESUME” will be cleared.
●
Resume points are memorized for each side of a double-sided
disc.
DR-M10SE_07Playback.fm Page 31 Thursday, March 4, 2004 2:56 PM
