Filename [DR-M10SE_07Playback.fm]
Masterpage:Left+
48
EN
Page 48
February 12, 2004 5:09 pm
PLAYBACK OPERATIONS (cont.)
To change the settings
You can change the Parental lock settings later.
A
Change the level.
A
Press
rt
repeatedly to select “PARENTAL LEVEL”,
then press
ENTER
.
B
Press
rt
repeatedly to select the desired level, then
press
ENTER
.
B
Change the country code.
A
Press
rt
repeatedly to select “COUNTRY CODE”,
then press
ENTER
.
B
Press
rt
repeatedly to select your country code, then
press
ENTER
.
●
See “Country/Area Code List for Parental Lock” (
墌
pg. 49).
C
Enter your password.
Press the
number keys
to enter the same password as in
step
D
of “To set Parental Lock for the first time”, then
press
ENTER
.
D
Complete the setting.
Press
SET UP
twice.
●
The normal screen resumes.
NOTE:
If you forget your password, enter “8888” in step
C
.
To temporarily release Parental Lock
When you set the parental lock level strictly, some discs may not
be played back at all. When you insert such a disc and try to
play it back, the confirmation screen appears on the TV screen,
asking you whether you want Parental Lock to be temporarily
released or not.
A
Access the password screen.
A
Place the disc on the disc tray.
●
If the disc is rated higher than the selected level, the
confirmation screen appears.
B
Press
w e
to select “YES”, then press
ENTER
.
●
If you select “NO”, you cannot play back that disc.
B
Enter your password.
Press the
number keys
to enter the same password as in
step
D
of “To set Parental Lock for the first time”, then
press
ENTER
.
●
When you enter the correct password, the Parental Lock is
released and the unit starts playback.
●
If you enter a wrong password, “ENTRY ERROR RETRY”
appears on the TV screen. Enter the correct password.
●
If you have successively entered wrong password three times,
“ENTRY ERROR CAN NOT CHANGE PASSWORD” appears
on the TV screen. In such a case, press
ENTER
. The disc will
stop. Then play the disc again, and try the procedure again
from step
A
.
NOTE:
If you forget your password, enter “8888” in step
B
.
Perform steps
A
to
B
of “To set Parental Lock for the first
time” on page 47 to access the “PARENTAL LOCK” screen
before continuing.
DR-M10SE_01.book Page 48 Thursday, February 12, 2004 9:08 PM
