Installing the Projector (continued)
22
This unit comes with a Lens Shift feature that enables upward/downward adjustment of the projection screen position.
Adjust accordingly depending on the installation conditions.
●
The shift level is between 0 % and 60 %. The shift level is set to 50 % as the default.
●
The position of the projection screen may be out of alignment due to the gear movement.
●
When lens shift setting (adjustment) is completed, mount the lens shift cover to this unit.
a
Project the image on the screen
●
Please refer to
A
Basic Operation Procedures
B
(
A
Page 26) on the method of projection.
b
Remove the lens shift cover
●
Remove the lens shift cover from this unit using a
G
screwdriver.
c
Adjust the projection screen position
●
Turn the shift adjustment screw using a
G
screwdriver
and adjust accordingly.
Turn clockwise
: Screen shifts upwards.
Turn anti-clockwise : Screen shifts downwards.
d
Mount the lens shift cover
●
Mount the lens shift cover to this unit using a
G
screwdriver.
Lens Shift Setting
Lens Shift Cover
Shift Downwards
Shift Upwards
Shift Adjustment
Screw
o
Projection screen position image according to
shift level
●
The projection screen posi-
tion only shifts vertically.
The slight horizontal dis-
placement shown in the
diagram is illustrative.
Approx. 60% (upward maximum)
Approx. 50% (default position)
Approx. 0%
(downward maximum)
DLA-HD10_EN-FR.book Page 22 Thursday, November 10, 2005 12:54 PM
