JVC DB-HDR36 Instructions Manual Download Page 55

Page: 55 / 60

Specifications

Product Name

HDR REAR PROJECTION SYSTEM

Model Name

LY-HDR36-2

LY-HDR36-4

Display Panel/Size

D-ILA device *1, 2

0.7" (1920 x 1080 pixels) x 3 (total no. of pixels: approx. 6.22 million)

Projection Lens

2.0 x power zoom lens (1.4:1 to 2.8:1), motorized zoom and focus

Light-source Lamp

265 W ultra-high pressure mercury lamp [product no.: PK-L2615U]

Average lifespan: 3500 hours (in “High” mode)

Screen Size (Inch)

36-inch

Display Area (Width x Height)

796 × 452 mm

Input Compatibility Signal

Refer to P. 56.

Display Resolution

1920×1080

Screen Gain/Screen Type

2.4 (Glossy)

4.8 (Glossy)

Brightness

2800 cd/m2

4500 cd/m2

Contrast

40000:1

Color Gamut

DCI P3 (Color Ratio of 98%)

Input Terminal

HDMI Input

Dual, HDMI 19-pin x 2 (HDCP 1.4-compatible) *3

Control Terminal RS-232C Terminal

1 system, D-sub 9-pin (male) (external control)

LAN Terminal

1 system, RJ-45 plug

Power Requirements

AC 100 V to 240 V, 50 Hz/60 Hz

Power Consumption

380 W (during standby mode: 1.5 W)

Operation Environment

Temperature: 5°C to 35°C; humidity: 20% to 80%; storage

temperature: -10°C to 60°C

Installation Height

Below 5,000 ft (1524 m)

Dimensions (Width x Height x Depth)

Approx. 803 mm × 906 mm × 730 mm

Mass

67.8 k

Accessories

Refer to P. 9.

*1 D-ILA is the abbreviation for Direct drive Image Light Amplifier.
*2 D-ILA devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%.

Only 0.01% or less of the pixels are either missing or would remain permanently lit.

*3 HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input

terminal may not be displayed in some cases due to changes in the HDCP specifications.

Design and specifications are subject to change without prior notice.

This projector is designed for use in Japan only, and cannot be used in any other country due to the different power

voltage.

This projector is designed for use in Japan only and can not be used in any other country.

Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order

to aid comprehension. Images may differ from the actual product.

This unit is a “JIS C61000-3-2-compliant device”.

About Trademarks and Copyrights

HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LCC.

Others

Summary of Contents for DB-HDR36





























































Search results

Summary of Contents for DB-HDR36

Reviews:

Related manuals for DB-HDR36

Brands by name

Popular brands

JVC DB-HDR36, Instructions Manual

Search results

Summary of Contents for DB-HDR36

Reviews:

Related manuals for DB-HDR36

Brands by name

Popular brands