When the Following Messages Appear...
Message
Description
Action
.
No Input
0
No device is connected to the input
terminal.
0
The input terminal is connected but
there is no signal.
Input the video signals.
.
HDMI-1
A video signal that cannot be used with
this unit has been input (The names of
input terminals such as “HDMI-1” and
“HDMI-2” will be displayed in yellow).
Input video signals that can be used.
.
BACK
Back
Lamp replacement
Indicates that the lamp needs to be
replaced soon.
To clear the message, press the [BACK]
button on the remote control.
Replace with a new lamp unit as soon as
possible. To replace the lamp, consult
your authorized dealer.
Checking the Power and Startup Status
Checking the Power Status
You can check the power status of this unit using the following method.
Check if the internal LED is lit from the air inlets
0
When the power cord is connected and power is supplied, the internal LED which is visible from the air inlets lights
up in orange.
Checking the Startup Status
If there is no display on the screen when this unit is in use, you can check whether the unit has been started up using
the following method.
Press the [INFO.] button on the remote control
0
If the lamp of this unit is lit, pressing the [INFO.] button on the remote control displays the information menu.
0
If the information menu is not displayed even after pressing the [INFO.] button on the remote control, the image may
have disappear temporarily. Press the [HIDE] button on the remote control once, then press the [INFO.] button again.
50
Troubleshooting
