Installing the Projector
Precautions during Installation
Please read the following carefully before installing this
unit.
Do not install at the following
This unit is a precision device. Please refrain from
installing or using it at the following locations. Otherwise,
it may cause fire or malfunction.
0
Dusty, wet and humid places
0
Places subject to oily smoke or cigarette smoke
(Even a small amount of smoke or oiliness can have
a long-term impact on this unit.)
0
On top of a carpet or bedding, or other soft surfaces
0
Places exposed to direct sunlight
0
Places with a high or low temperature
* This unit produces a great amount of heat, and is
designed to take in cool air to cool its optical
components. Using the unit at the above locations
may cause dirt to attach to the light path, thereby
resulting in dark images or dull colors.
* Dirt that sticks to the optical components cannot be
removed.
Maintain clearance from the wall, etc.
As the unit discharges a large amount of heat, install it
with adequate clearance from the surroundings as shown
below.
.
200 mm
and above
100 mm
and above
It is not necessary to
keep clearance at the
sides.
Exhaust Vent
Air Inlets
Using the projector
You are recommended to attach a commercially
available fall prevention wire to the unit to prevent it from
falling in the event of an earthquake etc.
(“Main Unit - Rear”P. 11)
Moving/transporting the unit
Take care not to drop the product when moving and
transporting the product. In addition, do not hold the
screen as it can come off.
Do not lift up the product with the handles if they are
defective.
To transport this unit, consult your authorized dealer.
Using the projector at a high altitude
When using this unit at a location that is higher than 900
m above sea level (low air pressure), set the “High
Altitude Mode” to “On”. (P. 41)
14
Set up
