39
Menu Operations
ENGLI
S
H
DEUTSH
FRAN
Ç
AIS
ITALIANO
ESPA
Ñ
OL
DLA-M2000LU/M2000SCU/ LCT0940-002A / ENGLISH
■
Quick Reference Guide for Video Menu Mode
* : Factory set value.
Main Menu in Video Menu Mode (While receiving video-device-related signals)
Image adj.
→
(Refer to page 47)
Brightness:
Brightness of the video image being projected can be adjusted. (–30 to +30, 0*)
Contrast:
Contrast of the video image being projected can be adjusted. (–30 to +30, 0*)
Sharpness:
Sharpness of the video image being projected can be adjusted. (–5 to +5, 0*)
Color:
Color density of the video image being projected can be adjusted. (–30 to +30, 0*)
Tint:
Tint of the video image being projected can be adjusted. (–30 to +30, 0*)
All reset:
Resets above items to the factory set values.
Yes / No
Setting 1
Position:
Video screen position and menu position can be adjusted.
→
(Refer to page 49)
Disp. Posi. / Menu
Tone:
Image tone can be changed. TV*/Cinema (Suitable for the cinema programes)
→
(Refer to
page 50)
Aspect change:
Selectable aspect ratio, 4:3*/16:9.
→
(Refer to page 50)
Decoder:
Selectable color systems, Normally, set to AUTO.
(Refer to page 44)
(This item is displayed only when inputting VIDEO or Y/C.)
AUTO*/NTSC/NTSC4.43/PAL/SECAM
Setting 2: Press ENTER to enter the Setting 2 submenu
Tracking:
Normally, no adjustment is required. The lateral size and display area of video image can be
adjusted. (–128 to + 127)
→
(Refer to page 46)
Screen:
Selectable screen’s aspect ratio. 4:3*/16:9
→
(Refer to page 45)
HDTV:
Selectable HDTV format. Normally, set to 1080i, 1080i*/1035i
→
(Refer to page 45)
Setting 1: Press ENTER to return to “Setting 1” submenu.
Color temp.
Color temp.:
Adjustable color temperature, Low/Middle*/High.
Will be adjusted to correct reddish or blueish image.
R-Gain:
Adjusts the red leve. (0 to 255, the adjustable range varies depending on signals)
G-Gain:
Adjusts the green leve. (0 to 255, the adjustable range varies depending on signals)
B-Gain:
Adjusts the blue leve. (0 to 255, the adjustable range varies depending on signals)
All-reset:
Reset above items to the factory set values.
Yes/No
Options
→
(Refer to page 52)
Options 1
Menu display:
15sec* (Menu disappears in 15 seconds.) / ON (Menu stays on.)
Line display:
5sec* (Line display such as “VIDEO”, “Y/C”, “PC1”, or “PC2” appears on top right of the screen for
5 seconds when the VIDEO or PC button is pressed.) / OFF (Line display does not appear.)
Keystone:
Press ENTER to enter the Keystone submenu.
Keystone:
Adjust to correct the trapezoidal distortion of the projected image.
(–80 to +128, 0*)
PC2 (BNC):
RGB* or YP
B
P
R
. Set to RGB when a computer device with analog RGB, V, H/Cs signals is
connected to the PC2 terminals. Set to YP
B
P
R
when a device with component signals (Y, B-Y, R-Y)
or DTV-format signals (Y, P
B
, P
R
) are connected to the PC2 terminals.
Options 2:
Press ENTER to enter the “Option 2” submenu.
Right Left rev.:
OFF* / ON (Select for upside-down hanging on the ceiling.)
Top Bottom inv.:
OFF* / ON (Select for upside-down hanging on the ceiling.)
RS-232C [bps]:
Selectable baud rate (transmission speed). 9600 / 19200*
Sleep time [min:]
Selectable sleep times. If no-signal condition continues for the period of
selected time (Unite: Minutes), the projector enters the stand-by mode. 15 / 30
/ 60 / OFF*
Options 1:
Press ENTER to return to the “Option 1” submenu.
Language
Language for on-screen display.
→
(Refer to page 45)
Japanese / English* / German / Spanish / Italian / French
Information
→
(Refer to page 54)
Input:
Shows the terminal name selected by the VIDEO or PC button. (Y/C, VIDEO, or PC2)
Switcher:
Has no meaning. This display currently has no meaning, (“CH.0” is usually displayed to indicate
that it is not being used.)
Source:
Shows the projected image’s type of video signal.
Lamp time:
Accumulated used hours of the light-source lamp.
%
