JVC CL-R813, Instruction Manual, Page: 18 / 88

- 18 -
ENGLISH
Avoid a place subject to
• Magnetic fields • Vibrations
• Corrosive gases • Electrostatic charge
It could cause the monitor to fail.
Do not use the monitor with condensation on the surface. It could cause
the monitor to fail. Condensation forms when the monitor is moved into a
warm room from a cold place. Let it sit until it goes away.
Do not place the monitor on its back or use in a place with little ventilation.
Heat could build up and damage the cabinet and/or the inner parts. It
could result in shortening of life, overheat, and/or fire.
Rest your eyes for 10 to 15 minutes per hour. Failure to do so could cause
eyestrain.
Disconnect the power cord if abnormalities such as smoke and fire, etc. are
observed. Do not position the monitor so that it is difficult to operate the
disconnection.
This product can be reused only if it is reconditioned under our
responsibility.
Please report to us and the authority of the member state if in any serious
incident that has occurred in relation this product.
LCD
Even if it is used properly, the monitor may cause harmful interference to
radio or television reception. Try the following measures to correct it.
• Increase the distance between the monitor and the radio/TV.
• Connect the monitor into a different outlet from the one to which the
radio/TV is connected.
Do not press, scratch, or put objects on the LCD panel surface. It could
cause monitor noise and/or cause the panel to fail.
Do not display a static image for too long. It could cause “ghosting” , a
phenomenon where the previous image displayed on the screen is seen
for moments after the image has changed.
Turn on a screensaver or enable the stand-by mode to avoid “burning in”,
the burning of an image onto the LCD panel after hours of the same image
being displayed.