JVC CL-R813, Instruction Manual, Page: 11 / 88

- 11 -
ENGLISH
Recommended separation distances between
portable and mobile RF communications equipment and the model CL-R813
The model CL-R813 is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the model CL-R813 can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the model CL-R813 as recommended below,
according to the maximum output power of the communications equipment.
Immunity to proximity fields from following RF wireless communication equipment has been
confirmed:
Test
frequency
(MHz)
Bandwidth a)
(MHz)
Service a) Modulation b)
Maximum
power
(W)
Minimum
separation
distance
(m)
IEC/EN
60601
test level
(V/m)
Compliance
level
(V/m)
385 380-390 TETRA400 Pulse
modulation b)
1.8 0.3 27 27
450 430-470 GMRS 460,
FRS 460
FM
±5 kHz
deviation
1 kHz sine
2 0.3 28 28
710
704-787 LTE Band
13, 17
Pulse
modulation
b)
217 Hz
0.2 0.3 9 9 745
780
810
800-960
GSM 800 /
900,
TETRA 800,
iDEN 820
CDMA 850,
LTE Band 5
Pulse
modulation b)
18 Hz
2 0.3 28 28 871
930
1720
1700-1990
GSM 1800;
CDMA
1900;
GSM 1900;
DECT;
LTE Band 1,
3, 4, 25;
UMTS
Pulse
modulation
b)
217 Hz
2 0.3 28 28 1845
1970
2450 2400-2570
Bluetooth,
WLAN,
802.11 b/g/
n,
RFID 2450,
LTE Band 7
Pulse
modulation b)
217 Hz
2 0.3 28 28
5240
5100-5800 WLAN
802.11 a/n
Pulse
modulation
b)
217 Hz
0.2 0.3 9 9 5500
5785
a): For some services, only the uplink frequencies are included.
b): The carrier shall be modulated using a 50 % duty cycle square wave signal.