9
To select the band (FM or AM)
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength
is tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To manually stop the search,
press either button.
If the FM reception is poor
Remote
ONLY
The M (monaural) indicator lights on the display.
Reception will improve though stereo effect is lost—
Monaural reception.
To restore the stereo effect,
press the button again. The
M (monaural) indicator disappears.
To preset the stations
Remote
ONLY
You can preset 30 FM and 15 AM stations.
1
Tune in to a station you want to preset.
• You can also store the monaural reception mode for
FM preset stations if it is selected.
2
Activate the preset number entry mode.
• Finish the following process while the indication on
the display is flashing.
How to select a number
Examples:
To select number 5, press 5.
To select number 10, press 10.
To select number 15, press 10, 1,
then 5.
To select number 30, press 10, 3,
then 0.
To select number 125, press 10,
10, 1, 2, then 5.
Listening to the Radio
INFO
To select the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other
countries use 10 kHz spacing. Before operating the tuner,
select the appropriate AM tuner interval spacing used for
your area.
1
Select “TUNER AM,” then turn off (standby) the
System.
2
Select the AM tuner interval spacing.
To select 9 kHz:
To select 10 kHz:
Main Unit
ONLY
(while holding...)
(while holding...)
EN09-18_UX-GP7V[U]1.indd 9
EN09-18_UX-GP7V[U]1.indd 9
6/16/08 11:23:32 AM
6/16/08 11:23:32 AM
