JVC CA-MXK50R, Instructions Manual

Page: 24 / 38

– 21 –
2
Press CLOCK/TIMER again.
“ON TIME” appears for 2 seconds, then the
unit enters on-time setting mode.
3
Set the on-time you want the unit
to turn on at.
1) Press
4
or
¢
to set the hour, then
press SET.
2) Press
4
or
¢
to set the minute, then
press SET.
“OFF TIME” appears for 2 seconds, then
the unit enters off-time setting mode.
4
Set the off-time you want the unit
to turn off (on standby) at.
1) Press
4
or
¢
to set the hour, then
press SET.
2) Press
4
or
¢
to set the minute, then
press SET.
The unit enters source selecting mode.
5
Press
4
or
¢
to select the
source to play, then press SET.
• Each time you press
4
or
¢
, the source
changes as follows:
TUNER FM : tunes in to a specified preset FM station.
=
go to step
6
.
TUNER MW : tunes in to a specified preset MW station.
=
go to step
6
.
TUNER LW : tunes in to a specified preset LW station.
=
go to step
6
.
CD : plays a disc from the first track.
=
go to step
7
.
TAPE
: plays a tape in deck A or B.
=
go to step
7
.
AUX
: plays an external source.
=
go to step 7 .
Using the Timers
There are three timers available—Daily Timer, Recording
Timer, and Sleep Timer.
Before using the timers, you need to set the clock built in the
unit. (See “Setting the Clock” on page 9.)
Using Daily Timer
With Daily Timer, you can wake to your favorite music or
radio program. You can set the timer whether the unit is on or
off.
How Daily Timer actually works
The unit automatically turns on, set the volume level to the
preset level, and starts playing the specified source when the
on-time comes (the
indicator flashes while the timer is
operating). Then, when the off-time comes, the unit
automatically turns off (stands by).
Daily Timer works every day unless you cancel it.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step
1
again.
• If you have made a mistake while setting timer, press
CANCEL/DEMO. (However, this does not always work. If
CANCEL/DEMO does not work, press CLOCK/TIMER
repeatedly and start from step
1
again.)
Before you start...
• When using a CD as the source to play:
—Make sure there is a CD on the currently selected
disc number tray.
• When using a tape as the source to play:
—Make sure that a tape is in the deck whose deck
indicator (A or B) is lit on the display.
• When using the external component as the source to
play:
—Set the timer equipped with the external component
at the same time.
On the unit ONLY:
1
Press CLOCK/TIMER repeatedly
until “DAILY” appears on the display.
indicator lights up and the DAILY (daily
timer) indicator starts flashing on the display.
• Each time you press the button, the clock/timer setting
modes change as follows:
DAILY
Canceled ON TIME
(Recording Timer)
CLOCK
(See page 9.)
REC ON TIME
(Daily Timer)
CD
TUNER FM
TUNER MW TUNER LW
TAPE AUX
CLOCK
/ TIMER
CLOCK
/ TIMER
SET
SET
SET
19-26.CA-MXK50R[B].pm6 02.4.12, 4:41 PM 21