JVC CA-MXK50R, Instructions Manual

Page: 21 / 38

– 18 –
Playing Back Tapes
Playing Back a Tape
1
Press EJECT (
0
) for the deck you want to
use.
2
Put a cassette in, with the exposed part of the
tape down and the side you want to play
facing front.
• You can play back only type I tapes.
3
Close the cassette holder gently.
If you put cassettes in both decks A and B, the last deck
which you have put a cassette into is selected.
To operate the other deck, press TAPE A or TAPE B (or
TAPE A/B on the remote control).
4
Press TAPE
3 3 3 3 3
.
The tape play starts and the tape running
indicator (
3
) starts flashing slowly.
When the tape plays to the end, the deck
automatically stops.
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
To stop during play, press
7
.
To operate the other deck, press TAPE A or TAPE B (or
TAPE A/B on the remote control), then TAPE
3
.
To fast-forward the tape, press
¡
(or
¢
/
¡
on the
remote control). The tape running indicator (
3
) starts
flashing quickly.
To rewind the tape, press
1
(or
4
/
1
on the remote
control). The tape running indicator (
2
) starts flashing
quickly.
To remove the cassette, press
0
EJECT for deck A or
EJECT
0
for deck B.
TAPE
For Deck A
For Deck B
11-18.MX-K50R[B].pm6 02.4.12, 4:41 PM 18