JVC CA-MXDVA5 Instructions Manual Download Page 41

Page: 41 / 90

– 38 –

If you are having a problem with your unit, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,
such as your dealer, for service.

Troubleshooting

Symptom

Hard to listen to broadcasts
because of noise.

No sound is heard.

The disc sound is discontinuous.

The carrousel does not open or
close.

The disc does not play.

No picture appears on the screen.

The left and right edges of the
wide picture (16:9) are missing.

No subtitle appears on the display
though you have selected the
initial subtitle language.

Audio language is different from
the one you have selected as the
initial audio language.

No sound is heard.

Unable to operate the DVD player
as you intend to do.

The cassette holders cannot be
opened.

Impossible to record.

Display demonstration starts
automatically during play.

Operations are disabled.

Unable to operate the unit from the
remote control.

Cause

• Antennas are disconnected.

• The AM loop antenna is too close to

the unit.

• The FM antenna is not properly

extended and positioned.

Connections are incorrect or loose.

The disc is scratched or dirty.

• The AC power cord is not plugged in.
• The carrousel is locked.

The disc is placed upside down.

• The video cord is not connected

correctly.

• An incorrect input has been selected

on the TV or monitor.

“4:3 PS” is selected when viewing on a
conventional TV (aspect ratio 4:3).

You are playing a disc with DTS
Digital Surround.

The built-in microprocessor may
malfunction due to external electrical
interference.

Power supply from the AC power cord
has been cut off while the tape was
running.

Small tabs on the back of the cassette
are removed.

Display demonstration has not been
canceled yet.

The built-in microprocessor may
malfunction due to external electrical
interference.

• The path between the remote control

and the remote sensor on the unit is
blocked.

• The batteries are exhausted.

Action

• Reconnect the antennas correctly and

securely.

• Change the position and direction of

the AM loop antenna.

• Extend the FM antenna at the best

position.

Check all connections and make
corrections. (See pages 6 to 9.)

Clean or replace the disc. (See page
37.)

• Plug the AC power cord.
• Unlock the carrousel. (See page 16.)

Place the disc with the label side up.

• Connect the video cord correctly.

• Select the correct input on the TV or

monitor.

Select “4:3 LB.” (See page 29.)

Some DVDs are programed to always
display no subtitle initially. If this
happens, press SUBTITLE on the
remote control after starting play.

Some DVDs are programed to always
use the original language initially. If
this happens, press AUDIO on the
remote control after starting play.

This unit cannot output DTS sound
without connecting a decoder
compatible with DTS Digital Surround.

Press and hold DUBBING until
“INITIAL” appears on the display (so
that you can operate the DVD player
normally).

Turn on the unit.

Cover the holes with adhesive tape.

Press CANCEL/DEMO on the unit.
(See page 9.)

Unplug the AC power cord and then
plug it back in.

• Remove the obstruction.

• Replace the batteries.

DISC GENERAL

FM/AM

DVD

TAPE

GENERAL

EN31-40MX-DVA5[J]_f

01.8.21, 8:04 PM

Summary of Contents for CA-MXDVA5



























































































Search results

Summary of Contents for CA-MXDVA5

Reviews:

Related manuals for CA-MXDVA5

Brands by name

Popular brands

JVC CA-MXDVA5, Instructions Manual

Search results

Summary of Contents for CA-MXDVA5

Reviews:

Related manuals for CA-MXDVA5

Brands by name

Popular brands