JVC C11U - VN Network Camera Instructions Manual Download Page 62

Page: 62 / 78

Security level

<User>

Top page

(index-e.html)

Still image page

(still-e.html)

Moving image page (java-e.html)

Still image URL (still.jpg)

Serverpush moving image
URL (push.jpg)

Java moving image URL
(mjpeg.class)

Configuration page (javaconfig-e.html)

Configuration menus

Image Quality Configuration (configimage-e.html)

View Configuration (viewconfig-e.html)

Other Configurations (config-e.html)

Alarm Configuration (alarm-e.html)

FTP Configuration (ftp-e.html)

Operations (Step 6 Operations with a Web Browser)

6-2 Access Authorization

The structure of URLs within the VN-C11 is as shown below.

If passwords are set, the [User Name and Password] request window appears (for access
authorization).

Top page

http://******/index-e.html (****** represents the URL of VN-C11.)

This page is intended for linkages to other VN-C11 web pages.

Verifying access authorization

Note

• It is recommended that you register the URL (Uniform Resource Locator).
• For speedy display of the VN-C11 web pages on your web browser, it is recommended that

you register the URL information during the access test using the set IP address or DNS
host name.

• For this purpose, use the [Favorites] function of Internet Explorer or, in the case of Netscape,

[Bookmarks]. While the VN-C11 web page is displayed in the browser, use the [Add] function
to bookmark the page.

User name is not used.

Enter any one of the three passwords that have
been set.

Click

VN-C10_E_62-78.pm6e

03.4.24, 9:50 AM

Summary of Contents for C11U - VN Network Camera















































































Search results

Summary of Contents for C11U - VN Network Camera

Reviews:

Related manuals for C11U - VN Network Camera

Brands by name

Popular brands

JVC C11U - VN Network Camera, Instructions Manual

Search results

Summary of Contents for C11U - VN Network Camera

Reviews:

Related manuals for C11U - VN Network Camera

Brands by name

Popular brands