JVC C11U - VN Network Camera Instructions Manual Download Page 60

Page: 60 / 78

5-5 Snapshot

Click the [SnapShot] button.

[SnapShot] button

Select [File] and [Save].

Specify the folder into which the file is saved.

The [Snap] screen appears.

The [Save As] screen appears.

With [V.Networks Controller], images being displayed or replayed can be saved as
still image files.

Enter the file name.

Note

Snapshots are saved as JPEG files in
the JPEG mode and as BMP files in the
MPEG mode.

Note

Other viewer software

• Still-image files saved with VN-C11 can be viewed with general viewer software. However,

images inverted by VN-C11 will not be displayed as such. Also, image color may also be
different.

Press [Save] to save a snapshot.

Operations (Step 5 Operations with V.Networks Controller)

VN-C10_E_44-61.pm6e

03.4.24, 9:55 AM

Summary of Contents for C11U - VN Network Camera















































































Search results

Summary of Contents for C11U - VN Network Camera

Reviews:

Related manuals for C11U - VN Network Camera

Brands by name

Popular brands

JVC C11U - VN Network Camera, Instructions Manual

Search results

Summary of Contents for C11U - VN Network Camera

Reviews:

Related manuals for C11U - VN Network Camera

Brands by name

Popular brands