JVC C11U - VN Network Camera Instructions Manual Download Page 61 | Manualshive

Page: 61 / 78

background image

61

The following environment is required for viewing and operating VN-C11 with a Web browser.

It is necessary for the PC to satisfy the technical requirements described in this
instruction manual (

☞

Page 7).

The PC must also satisfy the following Web browser conditions:

• A Web browser compatible with JavaScript and frame, that is, Netscape Ver. 4.x or Internet

Explorer Vers. 4.x, 5.x and 6.x.

• For the recommended CPU performance and required memory capacity, refer to the Web browser

in use.
For smooth display of large-screen moving images, specifications much better than those rec-
ommended are necessary.
Images from the camera will not be displayed properly in the 256-color mode.

• For Internet Explorer, an environment where Java can be properly run (Microsoft VM) is re-

quired.

LAN Environment

• VN-C11 can work as a web server that uses HTTP. Access linkage using a host name is pos-

sible if the environment supports DNS (Domain Name System).

• A direct connection of VN-C11 to a PC is possible using a cross-over cable. (Though rare,

certain LAN boards do not allow the use of a cross-over cable. Be sure to check your LAN
board.)

Operations (Step 6 Operations with a Web Browser)

It is possible to view still/moving images and perform various settings via not only
the provided [Controller] software but via a Web browser as well.
However, note that MPEG4 files cannot be viewed with a browser. Also, the browser
does not support the image inversion function.

6-1 Required Operating Environment

Note

Web page images

Web page images shown in this document refer to Web page data within VN-C11, including
images captured by the VN-C11 camera and displayed by a Web browser.
Depending on the type and settings of the Web browser, the page format and character fonts
of the displayed Web pages may vary. Should the page contents fail to be displayed in total, try
resizing the window, etc.
The illustrations in this manual are obtained from Internet Explorer display screens.

For Internet Explorer

• After the password has been changed, the password authentication window may ask for the

password twice. In this case, enter the same password twice.

For Netscape Navigator

• When a moving image from VN-C11 is displayed, the page content cannot be updated by

changing the window size. In this case, click the [Update] button on the Netscape window to
update the page display.

VN-C10_E_44-61.pm6e

03.4.24, 9:55 AM

61

«
...
59
60
61
62
63
...
»

Summary of Contents for C11U - VN Network Camera















































































Reviews:

No comments

Related manuals for C11U - VN Network Camera

Brand: Zivif Pages: 14

Brand: Parklio Pages: 29

Brand: iCamera Pages: 58

Brand: Dahua Pages: 18

Brand: Panasonic Pages: 42

Brand: Velocity Pages: 2

Brand: Red Arrow Pages: 2

NVIP-2VE-4231/PIR

Brand: Novus Pages: 36

Brand: Black Widow Security Pages: 6

DH-EPC PTZ Series

Brand: Dahua Pages: 28

Brand: Qvis Pages: 32

Brand: IP Camera Pages: 37

Brand: IntelliSense Pages: 2

Brand: chinavasion Pages: 2

GigE uEye SE Rev. 4

Brand: IDS Pages: 27

Brand: Kaya Instruments Pages: 49

Brand: NookBox Pages: 7

M.Zuiko Digital ED 150-400mm F4.5 TC1.25x IS...

Brand: Olympus Pages: 202

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands