JVC C11U - VN Network Camera Instructions Manual Download Page 75 | Manualshive

Page: 75 / 78

background image

75

<IMG SRC=“http:// ****** /push.jpg”> ( ****** represents the URL of VN-C11.)

6-7 VN-C11 Image Link

VN-C11 output images can be pasted onto separately created web pages.
Images (still and moving) captured with VN-C11 can be incorporated and displayed on a user-
created web page.

Note

Images cannot be displayed when VN-C11 is in the MPEG4 mode.

Displaying a Still Image:

By creating a web page with the following description, you can display a still image.

Displaying a Moving Image:

A moving image can either be in the Serverpush or Java format.
It is necessary to choose the image type or adjust the content description of the web page according
to its compatibility with the web browser in use.

Display in Serverpush

By creating a web page with the following description, you can display a moving image in Netscape
Navigator that supports Serverpush.

Display in Java Applet

By creating a web page with the following description, you can display a moving image (Java applet)
in Internet Explorer, etc. that supports Java.

Note

• The images (both still and moving) are displayed according to the size and compression rate

already set. If Java is disabled in the Web browser, images may not be displayed correctly.

• If a password has been set, prior password authentication is necessary before Java Applet

can be displayed (an Internet Explorer restriction).

• The values of “WIDTH” and “HEIGHT” should be identical to those of the image size setting

of VN-C11.

• If the browser version used is older than Netscape Ver. 4.06, it is required to update the Java

Plug-in version to 1.1 or higher in order to browse moving images. Java Plug-in is available in
Web sites such as “http://java.sun.com/getjava/” etc.

<IMG SRC=“http:// ****** /still.jpg”> ( ****** represents the URL of VN-C11.)

<APPLET CODE=“mjpeg.class” WIDTH=640 HEIGHT=480
CodeBase=“http:// ****** /”> </APPLET> ( ****** represents the URL of VN-C11.)

VN-C11_E_62-78.pm6e

03.4.24, 4:24 PM

75

«
...
73
74
75
76
77
...
»

Summary of Contents for C11U - VN Network Camera















































































Reviews:

No comments

Related manuals for C11U - VN Network Camera

Lumix H-FS14140

Brand: Panasonic Pages: 28

Brand: Safety Vision Pages: 21

Brand: Abus Pages: 16

Smart Home Monitoring

Brand: Rogers Pages: 20

X Wireless Series

Brand: Axess Pages: 8

Brand: Digimerge Pages: 44

Brand: NAPCO Pages: 4

Brand: Microgard Pages: 134

Brand: Zumimall Pages: 28

Brand: Ihagee Pages: 32

Brand: Safety Technology International Pages: 4

Brand: RAB Lighting Pages: 7

Brand: Ultrak Pages: 16

Brand: Honeywell Home Pages: 4

Brand: Navitar Pages: 4

Brand: Axis Pages: 4

Brand: MAGINON Pages: 43

Brand: Pentax Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands