JVC AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702, Service Manual

Page: 35 / 263

8
Slide the cover on the back of the remote down towards the bottom of the remote control.
Insert two batteries (included) carefully noting the “+”and “–” markings, placing the “–”end in
the unit first. Slide the cover back into place.
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. This information includes basic instructions
on operating your remote control, making a simple cable/antenna and optional VCR connection
and, finally, information on programming your television's Auto Tuner.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Step One - The Remote Control
The remote control is the key to operating your television's many great features. Before you
can operate your remote control, you first need to install the batteries (included).
Basic Operation
Turn the television on and off by pressing the P
OWER
button at the top right corner of the
remote.
The four key feature buttons at the center of the remote can be used for basic operation of the
television.The top and bottom buttons will scan forward and back through the available chan-
nels. The right and left buttons will turn the volume up or down.These buttons are also marked
with four arrows and are also used with JVC's onscreen menu system. You will need to use
these buttons later in the Quick Setup.
The next step is to connect your television to an antenna or cable.
Power Button
Key Feature Buttons
+
Proceed to Step Two
Quick Setup 1
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 8