JVC AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702 Service Manual Download Page 162

Page: 162 / 263

Button Functions

The M

ENU

button allows you to access JVC’s onscreen menu system. Press M

ENU

to activate

the onscreen menu system.

• See individual topics (like “Sound Settings”) for specific information on using menus.

Press the E

XIT

button to leave a menu screen. On the RM-C301G this button is also labeled

“PIP O

”. Press E

XIT

/PIP O

to turn off the Picture-in-Picture function (please see page 44

for more information on the PIP feature).

• PIP is available only on AV-36F802, AV-32F802 & AV-27F802.

Menu

Exit and PIP Off

Display

• Please note that if the Clock, Sleep Timer or On/Off Timer are not set, the Display screen will

show:"CLOCK NOT SET", "SLEEP TIMER OFF", and "ON/OFF TIMER OFF" respectively.

NOTE:

The Display screen shows the current status of timers and inputs.

Press the D

ISPLAY

button

The screen above shows the following information:

• The current channel or AV input (Channel 07)

• The current time (12:20 pm)

• Sleep Timer status/minutes remaining (The Sleep Timer is off)

• On/Off Timer status (Set to turn on everyday at 7:00 PM, off at 10:00 PM)

• Each Press of the D

ISPLAY

button changes the display mode:

Display – Full screen shown above

Time – Shows the current time only

Channel – Shows the current channel

Off – Turns Display off

• You may also turn off the Display at any step by pressing E

XIT

NOW 12:20 PM
SLEEP TIMER OFF
ON/OFF TIMER EVERYDAY

ON TIME 7:00 PM
OFF TIME 10:00 PM

AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 40

Summary of Contents for AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702








































































































































































































































































Search results

Summary of Contents for AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702

Reviews:

Related manuals for AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702

Brands by name

Popular brands

JVC AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702, Service Manual

Search results

Summary of Contents for AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702

Reviews:

Related manuals for AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702

Brands by name

Popular brands