JVC AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702, Service Manual

Page: 256 / 263

AV-36F702
AV-36F802
30 No. 51907B
Item
Measuring
instrument
Test point Adjustment part Description
SIDE PIN and
CORNER PIN
adjsutment Signal
generator
Remote
control unit
No.76 SIDE PIN
No.82 TOP PIN
No.84 BTM PIN Note:
Proceed to the following this adjustment after having completed the
adjustments of FOCUS, SUB BRIGHT, SUB CONTRAST, V CENTER,
TRAPEZIUM, V-SIZE and V-LINEARITY.
1. Receive a crosshatch signal.
2. Adjust such that vertical 2nd lines from left and right to be straight at
the No.76 SIDE PIN of the PICTURE MODE.
3. Adjust the end of vertical 2nd lines from left and right to be straight
at the No.82 TOP PIN and the No.84 BTM PIN of the PICTURE
MODE.
PIP DISPLAY
POSITION
adjustment
[AV-36F802] Notes:
• Proceed to the following this adjustment after having completed the
adjustments of V CENTER, TRAPEZIUM, V-SIZE, V-LINEARITY, H
SIZE, H POSITION, SIDE PIN and CORNER PIN for the main pic-
ture.
• Set VIDEO STATUS to “STANDARD”.
1. Receive a broadcast.
2. Select the PIP MODE from the SERVICE MENU.
3. Then adjust the PIP screen size so that it occupies 80% ± 2% of the
main screen area.
No.11 LEFT POS.
No.12 RIGHT POS.
No.13 UPPER POS.
No.14 LOWER POS.
LEFT POS. RIGHT POS.
UPPER POS.
LOWER POS.
Main
screen
size
Main screen size
80%
±
2%
80%
±
2%
Straight Straight
Remote
control unit